510274
15
Zoom out
Zoom in
Previous page
1/24
Next page
9.8 Cancelling a programme
1.
Press the button for some sec-
onds to cancel the programme and to
deactivate the appliance.
2.
Press the same button again to acti-
vate the appliance. Now, you can set
a new washing programme.
The appliance does not drain the
water.
9.9 Opening the door
While a programme or the delay start op-
erates, the appliance door is locked and
the display shows the indicator
.
CAUTION!
If the temperature and level of the
water in the drum are too high,
you cannot open the door.
Open the appliance door when the
delay start operates:
1.
Press to pause the appliance.
2.
Wait until the door lock indicator
goes off.
3.
Open the door.
4.
Close the door and press again.
The delay start continues to operate.
Open the appliance door when the
programme operates:
1.
Press the button for some sec-
onds to deactivate the appliance.
2.
Wait for some minutes and then open
carefully the appliance door.
3.
Close the appliance door.
4.
Set the programme again.
9.10 At the end of the
programme
The appliance stops automatically.
The acoustic signal operates (if it is acti-
vated).
In the display a
comes on.
•The indicator
goes off.
The door lock indicator goes off.
Remove the laundry from the appliance.
Make sure that the drum is empty.
Keep the door ajar, to prevent the mil-
dew and odours.
Close the water tap.
Press the button
for some seconds
to deactivate the appliance.
The washing programme is
completed, but there is water in the
drum:
The drum turns regularly to prevent the
creases in the laundry.
The door lock indicator
is on. The
door stays locked.
You must drain the water to open the
door.
To drain the water:
1.
If necessary, decrease the spin
speed. If you set
, the appli-
ance only drains.
2.
Press . The appliance drains the
water and spins.
3.
When the programme is completed
and the door lock indicator
goes off, you can open the door.
4.
Press the button for some sec-
onds to deactivate the appliance.
The appliance drains and spins
automatically after approximately
18 hours (except for Wool pro-
gramme).
9.11 AUTO Stand-by option
The AUTO Stand-by option automatically
deactivates the appliance to decrease the
energy consumption when:
You do not use the appliance for 5 mi-
nutes before you press
.
Press the button
to activate the ap-
pliance again.
After 5 minutes from the end of the
washing programme
Press the button
to activate the ap-
pliance again.
The display shows the end of the last
set programme.
Turn the programme knob to set a new
cycle.
ENGLISH 15
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Electrolux EWF1676GDW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Electrolux EWF1676GDW in the language / languages: English as an attachment in your email.

The manual is 8,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Electrolux EWF1676GDW

Electrolux EWF1676GDW User Manual - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info