510272
16
Zoom out
Zoom in
Previous page
1/28
Next page
Position A for powder detergent (factory setting).
Position B for liquid detergent.
When you use the liquid detergent:
Do not use gelatinous or thick liquid detergents.
Do not put more liquid then the maximum level.
Do not set the prewash phase.
Do not set the delay start.
9.4 Setting a programme
1.
Press one of the programme touch-
pad to set the necessary programme:
The related programme indicator
comes on.
–The indicator
flashes.
The display shows all information
about washing programme.
2.
If necessary, change the temperature,
the spin speed, the cycle duration, or
add available options. When you acti-
vate an option, the indicator of the set
option comes on.
If you set something incorrect, the
display shows that the selection is
not possible.
9.5 Starting a programme
without delay start
Press :
•The indicator
stops to flash and
stays on.
The display updates accordingly during
the washing programme.
The programme starts, the door is
locked and the display shows the indi-
cator
.
The drain pump can operate for a short
time when the appliance fills water.
After approximately 15 minutes
from the start of the programme:
The appliance adjusts automati-
cally the programme duration
agree with the laundry load.
The display shows the new val-
ue.
9.6 Starting a programme with
delay start
Press
again and again until the dis-
play shows the delay you want to set.
The related indicator comes on the dis-
play.
Press
:
The appliance starts the countdown.
When the countdown is completed,
the programme starts automatically.
You can cancel or change the set
of the delay start before you press
.
To cancel the delay start:
1.
Press to set the appliance to
pause.
2.
Press until the display shows ’.
Press
again to start the pro-
gramme immediately.
9.7 Interrupting a programme
and changing the options
You can change only some options be-
fore they operate.
1.
Press . The indicator flashes.
2.
Change the options.
3.
Press again. The programme con-
tinues.
9.8 Cancelling a programme
1.
Press the button for some sec-
onds to cancel the programme and to
deactivate the appliance.
2.
Press the same button again to acti-
vate the appliance. Now, you can set
a new washing programme.
The appliance does not drain the
water.
16
www.electrolux.com
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Electrolux EWF1408WDL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Electrolux EWF1408WDL in the language / languages: English as an attachment in your email.

The manual is 8,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Electrolux EWF1408WDL

Electrolux EWF1408WDL User Manual - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info