ENGLISH
15
switch the appliance on.
To switch the appliance off turn it to «0».
5. Select the desired programme
Turn the selector dial to the desired position: the
lights corresponding to the different phases making
up the selected programme light on.
The duration of the programme appears in the
display.
6. Select the temperature
Press the Temperature button if you wish to
select a temperature value different from the one
proposed by the washing machine. The relevant
light will light up.
7. Select the Spin Speed or the
Rinse Hold option.
Press the SPIN SPEED button repeatedly, in
order to select the desired spin speed or the Rinse
Hold option. The relevant light will light up.
If you select the Rinse Hold option, the machine
will stop at the end of the programme with the water
still in the tub.
Operating sequence
Before the first wash we recommend that you pour 2
litres of water into the main wash compartment
of the detergent drawer in order to activate the ECO
valve. Then run a cotton cycle at 60°C, with the
machine empty, in order to remove any
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.
1. Place the laundry in the drum
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure
out the amount of detergent recommended by the
manufacturer in a graduated cup and pour it into the
main wash compartment .
If you have selected the prewash function, pour
detergent into the appropriate compartment marked
.
3. Measure out the additive
If required, pour fabric softener into the compartment
marked , without exceeding the «MAX» mark.
4. Switch the machine ON
Turn the selector dial to the desired programme to
