310362
11
Zoom out
Zoom in
Previous page
1/23
Next page
ENGLISH
5 “Start/Pause” button
After having selected the programme and the
required options press this button to start the
machine. The corresponding pilot light stops
flashing and remains lit.
To interrupt a programme which is running, depress
the Start/Pause button: the corresponding pilot light
starts to flash.
To restart the programme from the point at which it
was interrupted, press the START/PAUSE button
again.
6Programme progress display
By selecting the wash programme, the pilot lights
corresponding to the various phases making up the
programme come on.
After the machine has started, only the running
phase pilot light stays on.
/
: when this light comes on this means
that the machine is performing the washing
phase. If you have selected the “Prewash
function, this light will be on during the prewash
phase too.
= rinses
= spin
= end of programme
= door
At the end of the programme the pilot light
illuminates.
The pilot light also flashes in the event of
operating problems:
- 4 flashes = the door has not been closed
- 2 flashes = the machine does not empty
- 1 flash = the machine does not fill
To eliminate the problem, see paragraph
“Something not working”.
The “door” pilot light indicates if the door can be
opened:
- light on: the door cannot be opened
- light off: the door can be opened
It stays on during the whole programme indicating
that the door is locked.
When the light goes out, the door can be opened
(see page 17).
7 Spin speed selector dial
This dial allows you to reduce the final and the
intermediate spin speeds or to select the NO SPIN
or RINSE HOLD option.
The speeds on the dial refer to cotton programmes.
Position 1000 (or 1200) corresponds to
900 r.p.m. for synthetics and wool and 700 r.p.m. for
delicates.
Position 500 corresponds to 450 r.p.m. for delicates
and 500 r.p.m. for synthetics and wool.
NO SPIN : by selecting this option all the
spinning phases are suppressed. To be used for
extremely delicate items.
The machine will add 3 rinses on cotton
programmes and 1 rinse on synthetic
programme.
RINSE HOLD : by selecting this option
the water of the last rinse is not emptied out
to prevent the fabrics from creasing. When
the programme has finished the phase light
END and the door light are on to
indicate that the water must be emptied out.
To do this:
turn the programme selector dial to “O
select the drain or spin programme.
Using the spin speed selector dial you can
choose the desired spin. If the dial remains on
position or the machine will perform the
spin speed at 400 rpm.
depress START button.
11
132991020-EWF1010/1210•GB 21/07/03 09:31 Pagina 11
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Electrolux ewf 1010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Electrolux ewf 1010 in the language / languages: English as an attachment in your email.

The manual is 0,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info