304567
13
Zoom out
Zoom in
Previous page
1/26
Next page
ENGLISH
7 Anti-crease button
When this button is pressed, the last rinse water is
not emptied out, to prevent the fabrics from creasing.
When the programme has finished, the pilot light of
the START/PAUSE button flashes to indicate that
the water must be emptied out.
To empty out water there are 3 possibilities:
Select programme (draining):
The water is emptied out without spinning.
Attention! Before selecting programme the
selector dial has to be positioned on X (cancelling).
Depress START/PAUSE button : after
emptying, the machine performs the spin cycle
corresponding to the type of fabric previously
selected.
Select the spin speed by means of the relevant
button and then depress the START/PAUSE
button.
The machine empties itself after 18 hours.
8 Extra rinse button
Can be used with all programmes except the wool
programme. The machine performs 4 rinses instead
of 3.
This option is recommended for people who are
allergic to detergents and in areas where the water is
very soft.
9 START/PAUSE button
This button has three functions:
Start - Pause - Draining of water / Spin.
After having selected the required programme, press
this button to start the machine; the corresponding
pilot light stops flashing.
To interrupt a programme which is running, depress
the Start/Pause button: the corresponding pilot light
starts to flash.
To restart the programme from the point at which it
was interrupted, press the START/PAUSE button
again.
Pause
Start
By depressing the Start/Pause button
The water of programme (Soak) is emptied out
The water of the last rinse on programmes with
Anti-crease option is emptied out and the
laundry is spun.
10 Programme progress display
By selecting the wash programme, the pilot lights
corresponding to the various phases making up the
programme come on.
After the machine has started, only the running
phase pilot light stays on. When the programme has
finished, the End pilot light comes on.
The END pilot light flashes in the event of
operating problems.
At the same time one of the following lights starts to
flash:
= the machine does not fill
= the machine does not empty
= the door has not been closed
To eliminate the problem, see paragraph “Something
not working”.
If the pilot light flashes at the end of the
programme this means that the drain filter must be
cleaned.
The door light indicates if the door can be
opened:
Light on: the machine is functioning, but the door
cannot be opened (see page 14).
Light off: the door can be opened (at the end of
the cycle) or cannot be opened because the
machine is functioning.
Light blinking: the machine is in PAUSE and the
door cannot be opened.
Draining of water/spin
13
132996651•EW1232I•GB.qxd 2-10-2001 8:34 Pagina 13
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Electrolux ew 1232 i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Electrolux ew 1232 i in the language / languages: English as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info