Manual Electrolux ESL 66065 (page 18 of 48) (English, German, Dutch)

451770

Zoom out

Zoom in

1/48

salt in the appliance can cause corrosion

or make a hole in the bottom of the appli-

ance.

• Do not fill the rinse aid dispenser with

other products than the rinse aid, (dish-

washer cleaning agent, liquid detergent).

This can cause damage to the appliance.

• Make sure that the spray arms can move

freely before you start a washing pro-

gramme.

• The appliance can release hot steam if

you open the door while a washing pro-

gramme operates. There is a risk of skin

burns.

•Do not remove the dishes from the appli-

ance until the washing programme is

completed.

Care and cleaning

• Before you clean the appliance, deacti-

vate it and disconnect the mains plug

from the mains socket.

• Do not use flammable products or prod-

ucts that can cause corrosion.

• Do not use the appliance without the fil-

ters. Make sure that the installation of the

filters is correct. An incorrect installation

causes unsatisfactory washing results

and damage to the appliance.

• Do not use spray water or steam to clean

the appliance. Risk of electrical shock

and damage to the appliance.

Installation

• Make sure that the appliance is not dam-

aged. Do not install or connect a dam-

aged appliance, contact the supplier.

• Remove all packaging before you install

and use the appliance.

• Only a qualified person must do the elec-

trical connection, the plumbing and the

installation of the appliance. This to pre-

vent the risks of structural damage or in-

jury.

• Make sure that the mains plug is discon-

nected from the mains socket during in-

stallation.

• Do not drill into the sides of the appliance

to prevent damage to hydraulic compo-

nents and electrical components.

• Important!Obey the instructions in the

template supplied with the appliance:

– To install the appliance.

– To assemble the door panel.

– To connect to the water supply and

drain.

• Make sure that the appliance is installed

below and adjacent to safe structures.

Frost precautions

• Do not install the appliance where the

temperature is less than 0 °C.

• The manufacturer is not responsible for

frost damage.

Water connection

• Use new hoses to connect the appliance

to the water supply. Do not use used ho-

ses.

• Do not connect the appliance to new

pipes or pipes not used for a long time.

Let the water flow for some minutes, then

connect the inlet hose.

• Make sure not to squash or cause dam-

age to the water hoses when you install

the appliance.

• Make sure that the water couplings are

tight to prevent a water leakage.

• The first time you use the appliance,

make sure that the hoses do not have

water leaks.

• The water inlet hose has a safety valve

and a double sheath with an inner mains

cable. There is pressure in the water inlet

hose only when the water flows. If there

is a leak in the water inlet hose, the safety

valve interrupts the flow of water.

– Be careful when you connect the water

inlet hose:

– Do not put the water inlet hose or

the safety valve in water.

– If the water inlet hose or the safety

valve are damaged, immediately dis-

connect the mains plug from the

mains socket.

– Contact the service centre to replace

the water inlet hose with safety

valve.

Warning! Dangerous voltage.

18 electrolux

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Electrolux ESL 66065 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 4,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Electrolux ESL 66065 Manual

Product: