123592
86
Zoom out
Zoom in
Previous page
1/96
Next page
If you decide to revert back to the use of
individual detergents we advise that you:
1. Deactivate the Multitab function.
2. Fill up the dispensers for salt and
rinse aid again.
3. Adjust the water hardness setting to
the highest setting and perform 1
normal washing programme without
loading any dishes.
4. Adjust the water hardness setting
according to the hardness of the wa-
ter in your area.
5. Adjust the rinse aid dosage.
Select and start a washing programme
1. Check that the baskets have been loaded
correctly and that the spray arms are free
to rotate.
2. Check that the water tap is opened.
3. Press the On/Off button.
The last performed washing programme
will be automatically selected.
4. Close the dishwasher door.
5. Select the washing programme (see
"Washing programmes" chart). Press
OK to confirm.
6. If required, postpone the start of the pro-
gramme (delay start). Press OK to con-
firm.
7. Set, if required, the options.
8. Press start button, the washing pro-
grammes starts automatically.
If after the start button has been press-
ed, one or both of the salt/rinse aid mes-
sages appear in display, the programme
will not start. Press OK to start the pro-
gramme.
If the delay start has been selected, the
display will show the time duration and the
end time of the programme.
Once the programme is running the dis-
play shows:
the phases of the programme progress,
updates the running and ending time of
the programme.
Cancel a delay start in progress
Press start button, follow the displayed in-
structions to cancel the delay start and re-
turn to menu programmes.
Press start button, the set washing pro-
gramme starts automatically.
Warning! Interrupt or cancel a
washing programme in progress
ONLY if it's absolutely necessary.
Attention! Hot steam may escape
when the door is opened. Open the
door carefully.
Interrupt a washing programme in
progress
Open the dishwasher door; the pro-
gramme will stop. Close the door; the pro-
gramme will start from the point at which
it was interrupted.
Cancel a washing programme in
progress
Press start button, follow the displayed in-
structions to cancel the washing pro-
gramme and return to setting mode.
If a new washing programme is to be se-
lected, check that there is detergent in the
detergent dispenser.
End of the washing programme
The dishwasher will automatically stop.
A message in the display informs you that
the programme has ended.
If one or both of the salt/rinse aid mes-
sages appear in display and you post-
pone the refilling it is anyway possible to
switch off the appliance.
1. Open the dishwasher door, leave it ajar
and wait a few minutes before removing
the dishes; this way they will be cooler
and the drying will be improved.
2. Switch off the dishwasher by pressing the
On/Off button.
Unloading the dishwasher
Hot dishes are sensitive to knocks. The
dishes should therefore be allowed to cool
down before removing from the appliance.
Empty the lower basket first and then the
upper one; this will avoid water dripping
from the upper basket onto the dishes in
the lower one.
86 electrolux
86


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Electrolux esi68850x at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Electrolux esi68850x in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 11,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info