Manual Electrolux esi 67010 x (page 31 of 104) (English, German, Dutch, French)

127575

Zoom out

Zoom in

1/104

Cancel button

With this button you can cancel a washing

programme or a delay start in progress.

Programme selection buttons

Press one of these buttons until the pro-

gramme indicator light of the desired pro-

gramme comes on.

Save energy button

This function decreases the temperature in

the drying phase. Energy saving is between

10% and 25%.

Dishes can be wet at the end of the pro-

gramme. In this condition we recom-

mend, to open the dishwasher door and

keep it ajar and let dishes dry naturally.

This function can be set with all washing pro-

grammes. The related indicator light comes

on when you press the button.

The save energy function has no effect on

some programmes. Refer to 'Washing pro-

grammes' for the list of programmes where

save energy has or not effect.

Delay start button

You can delay the start of the programme for

between 1 and 19 hours.

Refer to 'Select and start a washing pro-

gramme' chapter for the set of this function.

The digital display

The digital display indicates:

• the level of hardness to which the water

softener is set,

• the approximate remaining time of the run-

ning programme,

• activation/deactivation of the rinse aid dis-

penser ( ONLY with multitab function ac-

tive),

• the end of a washing programme (a zero

will appear in the digital display),

• the countdown for the delay start,

• fault codes concerning malfunction of the

dishwasher.

Function buttons (A, B and C)

The following functions can be set using

these buttons:

• adjustment of the water softener level,

• activation/deactivation of the rinse aid dis-

penser when multitab function is active.

Setting mode

The appliance must be in setting mode

when you:

– select a washing programme,

– adjust the water softener level,

– activate/deactivate the rinse aid dis-

penser.

Switch on the appliance.

– All programme indicator lights come on,

the appliance is in setting mode.

Switch on the appliance.

– Only one programme indicator light comes

on, the last selected programme is still set.

In this case, to go back to the setting

mode, you must cancel the programme.

– Simultaneously press and hold the cancel

button until all the programme indicator

lights come on. The programme has been

cancelled and the appliance is now in set-

ting mode.

First use

Before using your dishwasher for the first

time:

• Ensure that the electrical and water con-

nections comply with the installation in-

structions

• Remove all packaging from inside the ap-

pliance

• Set the water softener level

• Pour 1 litre of water into the salt container

and then fill with dishwasher salt

• Fill the rinse aid dispenser

If you want to use combi detergent

tablets such as: '3 in 1', '4 in 1', '5 in

1' etc. set the multitab function. (Re-

fer to 'Multitab function').

Setting the water softener

The dishwasher is equipped with a water

softener designed to remove minerals and

electrolux 31

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Electrolux esi 67010 x in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 13,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Electrolux esi 67010 x Manual

Product: