573695
67
Zoom out
Zoom in
Previous page
1/76
Next page
5. Adjust the released quantity of rinse
aid.
6.3 Setting and starting a
programme
Setting mode
The appliance must be in setting
mode to start a programme.
Turn the programme knob until the pro-
gramme marker is aligned with a pro-
gramme on the control panel. If the on/off
indicator comes on and start indicator
starts to flash the appliance is in setting
mode.
If the control panel does not show this
condition, press and hold, at the same
time Start and Delay until the appliance
is in setting mode
Starting a programme without
delay start
1. Open the water tap.
2.
Close the appliance door.
3. Turn the knob until the programme
marker is aligned with the symbol of
the programme you want to set.
On/off indicator comes on.
Start indicator starts to flash.
4. Press Start to start the programme.
On/off indicator and start indicator
are on.
Starting a programme with delay
start
1. Set the programme
2.
Press Delay to delay the start of the
programme of 3 hours.
The delay indicator comes on.
3.
Press Start to start the countdown.
The start indicator comes on.
Opening the door while the
appliance operates
If you open the door, the appliance stops.
When you close the door, the appliance
continues from the point of interruption.
Cancelling the delay start while
the countdown operates
1. Press and hold Start and Delay until
the start indicator starts to flash.
2.
Press Start to start the programme.
Make sure that there is detergent
in the detergent dispenser before
you start a new programme.
Cancelling the programme
1.
Press and hold Start and Delay until
the start indicator starts to flash.
Make sure that there is detergent
in the detergent dispenser before
you start a new programme.
At the end of the programme
When the programme is completed
comes on. If you do not deactivate the
appliance within 5 minutes all indicators
goes off. This helps to decrease energy
consumption.
1.
To deactivate the appliance, turn the
knob until the programme marker is
aligned with the on/off indicator.
2.
Close the water tap.
Important
Let the dishes become cold before you
remove them from the appliance. Hot
dishes can be easily damaged.
First remove the items from the lower
basket, then from the upper basket.
There can be water on the sides and on
the door of the appliance. Stainless
steel becomes cool more quickly than
the dishes.
ENGLISH 67
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Electrolux ESF6211LOX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Electrolux ESF6211LOX in the language / languages: English, Dutch as an attachment in your email.

The manual is 7,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Electrolux ESF6211LOX

Electrolux ESF6211LOX User Manual - German, French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info