127328
87
Zoom out
Zoom in
Previous page
1/96
Next page
Setting and starting the programme with
delay start
1. Once selected the washing programme,
press the delay start button until the flash-
ing number of hours for the delay start
appear in the digital display. The start of
the selected washing programme can be
delayed for between 1 and 19 hours.
2. Close the dishwasher door, the count-
down starts automatically. The number in
the display is no longer flashing but fixed
with static light.
With the delay start function set, the
programme in progress indicator light
goes off. Once the countdown of the de-
lay start has elapsed, the washing pro-
gramme will start automatically and the
programme in progress indicator light
comes on.
3. The countdown will decrease with steps
of 1 hour.
4. The opening of the door will interrupt the
countdown. Close the door; the count-
down will continue from the point at
which it was interrupted.
5. Once the delay start has elapsed the pro-
gramme will start automatically.
The selection of the washing pro-
gramme and delay start can also occur
with the door closed. Keep in mind that
in this way, once a washing programme
button is pressed you have ONLY 3
seconds in which you can choose an-
other programme or select a delay start,
after which the selected programme will
start automatically.
Warning! Interrupt or cancel a
washing programme in progress
ONLY if it's absolutely necessary.
Attention! Hot steam may escape
when the door is opened. Open the
door carefully.
Interrupt a washing programme in
progress
Open the dishwasher door; the pro-
gramme will stop. Close the door; the pro-
gramme will start from the point at which
it was interrupted.
Press the On/Off, all indicator lights will go
off. Press the On/Off button again; the pro-
gramme will start from the point at which
it was interrupted.
Cancel a delay start or a washing
programme in progress
Simultaneously press and hold the two
function buttons B and C until all the pro-
gramme lights come on and the pro-
gramme in progress indicator light goes
off.
Cancelling a delay start will also cancel the
washing programme. You have to select
the washing programme again.
If a new washing programme is to be se-
lected, check that there is detergent in the
detergent dispenser.
End of the washing programme
The dishwasher stops automatically.
Zero appears in the digital display.
•The programme in progress indicator
light remains on.
The light of the programme just ended re-
mains on.
1. Switch off the dishwasher by pressing the
On/Off button.
2. Open the dishwasher door, leave it ajar
and wait a few minutes before removing
the dishes; this way they will be cooler
and the drying will be improved.
Unloading the dishwasher
Hot dishes are sensitive to knocks. The
dishes should therefore be allowed to cool
down before removing from the appliance.
•Empty the lower basket first and then the
upper one; this will avoid water dripping
from the upper basket onto the dishes in
the lower one.
Water may appear on the sides and the
door of the dishwasher as the stainless
steel will eventually become cooler than
the dishes.
electrolux 87
87


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Electrolux esf 66710 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Electrolux esf 66710 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 15,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info