Manual Electrolux esf 65710 x (page 46 of 96) (English, German, Dutch, French)

127983

Zoom out

Zoom in

1/96

1. To the sink outlet spigot, securing it to the

underside of the work surface. This will

prevent waste water from the sink run-

ning into the machine.

2. To a stand pipe provided with venthole,

minimum internal diameter 4 cm.

max 85 cm

min 40 cm

max 400 cm

The drain hose can face either to the right or

left of the dishwasher

Ensure the drain hose is not bent or squash-

ed as this could prevent or slow down the

discharge of water.

The sink plug must not be in place when the

machine is draining as this could cause the

water to syphon back into the machine.

If you use a drain hose extension, its internal

diameter must be no smaller than the diam-

eter of the hose provided.

Likewise the internal diameter of the cou-

plings used for connections to the waste out-

let must be no smaller than the diameter of

the hose provided.

When connecting the drain hose to an under

sink trap spigot, the entire plastic mem-

brane (A) must be removed. Failure to re-

move all the membrane will result in food

particles building up over time eventually

blocking the dishwasher drain hose spigot

Our appliances are supplied with a se-

curity device to protect against the re-

turn of dirty water back into the machine.

If the spigot of your sink has a "no return

valve" incorporated this can prevent the

correct draining of your dishwasher. We

therefore advise you to remove it.

To avoid water leakage after installation

make sure that the water couplings are

tight.

Electrical connection

Warning! Safety standards require

the appliance to be earthed.

Prior to using the appliance for the

first time, ensure that the rated volt-

age and type of supply on the rating

plate match that of the supply where

the appliance is to be installed. The

fuse rating is also to be found on the

rating plate.

Always plug the mains plug into a

correctly installed shockproof sock-

et.

Multi-way plugs, connectors and ex-

tension cables must not be used.

This could constitute a fire hazard

through overheating.

If necessary, have the domestic wir-

ing system socket replaced. In case

that the electrical cable has to be

replaced, contact your local Service

Force centre.

The plug must be accessible after

the appliance has been installed.

Never unplug the appliance by pull-

ing on the cable. Always pull the

plug.

The manufacturer accepts no liabil-

ity for failure to observe the above

safety precautions.

Environment concerns

The symbol on the product or on its

packaging indicates that this product may

not be treated as household waste. Instead

it should be taken to the appropriate

46 electrolux

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Electrolux esf 65710 x in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Electrolux esf 65710 x Manual

Product: