GerŠtetŸr und MšbeltŸr auf ca. 90¡ šffnen. Den
Winkel (B) in der Schiene (A) einsetzen. GerŠtetŸr
und MšbeltŸr zusammenhalten und die Bohrlšcher
anzeichnen (siehe Abb.). Winkel abnehmen und die
Bohrlšcher mit ¯ 2mm und einem Abstand von 8
mm von der TŸrau§enkante ausfŸhren. Den Winkel
wieder auf der Schiene anbringen und mit den
mitgelieferten Schrauben befestigen.
FŸr eine allfŠllig notwendige Ausrichtung der
MšbeltŸr, den Spielraum der Langlšcher nutzen.
Nach Beendigung der Arbeiten den einwandfreien
Verschlu§ der GerŠtetŸr ŸberprŸfen.
Die Abdeckung (D) in die Schiene (B) eindrŸcken,
bis sie einrastet.
Vergewissern Sie sich nach AusfŸhrung des An-
schlagwechsels der TŸren, da§ alle Schrauben
fest angezogen sind und ŸberprŸfen Sie auch,
ob die Magnetdichtung am Mšbel perfekt anliegt.
Bei einer niedrigen Raumtemperatur (z.B. im
Winter) kann es vorkommen, dass die Dichtung
nicht perfekt am Schrank haftet. Die Wiederher-
stellung der Dichtung erfolgt automatisch nach
gewisser Zeit. Wollen Sie aber diesen Prozess
beschleunige, so genšgt es die Dichtung mit
einem Fšn zu erwŠrmen.
50
Cleaning the interior
Before using the appliance for the first time, wash
the interior and all internal accessories with luke-
warm water and some neutral soap so as to remove
the typical smell of a brand-new product, then dry
thoroughly.
Do not use detergents or abrasive
powders, as these will damage the finish.
USE OF THE FREEZER
This freezer compartment has been marked with
the symbol , which means that it is
suited to the freezing of fresh foods, the
conservation of frozen foods and the production
of ice-cubes.
Starting
Insert the power supply plug into the nearest wall
socket (the function indicator light (E) will light up
indicating that the freezer is receiving electrical
input). Turn the thermostat knob (A) to the right to a
medium setting (the temperature alarm light (C) will
light up). For the satisfactory conservation of frozen
foods, the freezerÕs internal temperature must be
lower than -18¡C. Wait until the temperature alarm
light (C) turns off when the optimum temperature
has been reached.
To turn off the freezer, turn the thermostat knob to
the ÇOÈ position. The refrigerator compartment will
remain operating.
Temperature regulation
The temperature is automatically regulated and can
be increased to achieve a higher temperature
(warmer) by rotating the thermostat knob toward
lower settings or reduced (colder) rotating the knob
towards higher settings.
However, the exact setting should be chosen
keeping in mind that the temperature inside the
refrigerator depends on:
¥ room temperature;
¥ how often the door is opened;
¥ the quantity of food stored;
¥ location of appliance.
A medium setting is generally the most suitable.
Important
If the ambient temperature is high or the
appliance is fully loaded, and the appliance is
set to the lowest temperatures, it may run
continuously causing frost to form on the rear
wall. In this case the dial must be set to a higher
temperature to allow automatic defrosting and
therefore reduced energy consumption.
Quick-freezing
For quick-freezing, turn the N/S knob (B) to the ÇSÈ
symbol. The quick-freezlng indlcator light (D) will
then light up.
USE
Control panel
A. Thermostat knob
B. Normal/Super (quick-freezing) switch
C. Warning light
D. SUPER operating control light
E. Pilot light
