330907
29
Zoom out
Zoom in
Previous page
1/80
Next page
3. Set the temperature. Touch OK to con-
firm.
Switching off the heating function
Touch
to cancel the procedure.
The display shows the main menu.
Setting the oven temperature
Touch + or - to set the temperature.
The appliance starts to heat.
When the appliance operates at the set
temperature, an acoustic signal
sounds.
Showing the oven temperature
Touch + or -at the same time.
The display shows the oven temperature.
Heat-up indicator
When you activate an oven function, the
bar on the display comes on. The bar
shows that the temperature increases.
Rapid heat-up indicator
For some oven functions the rapid heat-up
function decreases the heat-up time auto-
matically. The bar of the indicator moves
from right to left until the oven reaches the
target temperature.
Residual heat indicator
When you deactivate the appliance, the dis-
play shows the residual heat. You can use
the heat to keep the food warm.
CLOCK FUNCTIONS
Symbol Function Description
Minute Minder
To set a countdown (max 2 hours 30 minutes). This function
has no effect on the operation of the appliance.
Duration
To set how long the appliance has to be in operation (max. 23 h
59 min).
End Time
To set the switch-off time for an oven function (max. 23 h 59
min).
You can use Duration and End Time at
the same time, if the appliance is acti-
vated and deactivated automatically
later.
If you set the time for a clock function, the
time starts to count down after 5 seconds.
If you use the clock functions Duration
and End Time , the heating elements
deactivate after 90% of the set time.
The appliance uses the residual heat to
continue the cooking process until the
time ends (3-20 minutes).
Setting the clock functions
1. Set a heating function.
2.
Touch
again and again until the
display shows the necessary clock func-
tion and the related symbol.
3. Touch + or - to set the necessary time.
Touch OK to confirm.
After 90% of the set time, an acoustic
signal sounds. The appliance deacti-
vates. The display shows a message.
4. Touch a sensor field to stop the signals.
With Minute Minder you must activate
the appliance to set the clock function.
With Duration and End Time the appli-
ance deactivates automatically.
With Duration and End Time you must
set the heating function and the tem-
perature first. Then you can set the
clock function.
Heat+Hold
The Heat+Hold function keeps prepared
food warm at 80° for 30 minutes. It acti-
vates after the baking or roasting procedure
ends.
Conditions for the function:
The set temperature is more than
80°C.
The function duration is set.
Activating the function
1. Activate the appliance.
2. Select the oven function.
3. Set the temperature above 80°C.
electrolux 29
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Electrolux eoc 69612 x at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Electrolux eoc 69612 x in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 8,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info