351845
6
Zoom out
Zoom in
Previous page
1/15
Next page
21
Regulation and Control
II FFrreeeezzeerr ccoonnttrrooll kknnoobb
Setting the knob at 1 will give you a minimum fre-
ezing temperature. Setting 7 will give you the
maximum freezing temperature. For normal use
set the freezer at a middle setting (The exact set-
ting will depend on your usage of the freezer).
22 TThhee ddoooorr aallaarrmm
If either of the doors is left open for a prolonged
period of time the door alarm will start to beeb and
a red flashing light will go on. Pressing the alarm
button will switch the buzzer off and the light will
stop flashing, but remain red. If you simply shut
the doors, this will also switch off the door alarm
buzzer and the light automatically.
33 TTeemmppeerraattuurree aallaarrmm
If the internal temperature has risen significantly
the temperature alarm will sound and the light will
start to flash. To switch the alarm off simply press
the temperature alarm button. This will stop the
buzzer and the red light will stop blinking and
remain red.
The temperature alarm may go on because:
a.- The doors have been left open.
b.- There has been a power failure.
c.- More than the recomended amount of food has
been put in at one time.
d.- You need to set the temperature controls to a
colder position.
If the alarm goes on constantly you should contact
you THECNICAL OFICIALSERVICE.
44 FFaasstt FFrreeeezzee
This feature is designed to help you freeze
your food more quickly. It is best to press the
fast freeze button before going shopping (pre-
ferably 3 houres in advance) in order to have
the freezer in an optimal state to put your food
in. If you haven’t pressed the button prior to
purchasing your food you can of course put
your new purchases in, but it will take longer
for the freezer to cool down. (If you put a lot of
fresh food into your freezer you could cause
the temperature alarm to go on. For further
information see sention on temperature
alarm).
55 OOnn//OOffff bbuuttttoonn
To make the product work press the ON/OFF
button continuosly for 3 seconds. To switch the
product off press the button continuously for 3
seconds. When the product has been plugged
in and the button pressed for the 3 seconds,
the button will light up in green. If the ON/OFF
button is green the freezer knob and fridge
knob will also be lit up.
66 FFrriiddggee ccoonnttrrooll
Setting the knob to the standby position when
the freezer is working, but the fridge if not
being used, (for example when you go on holi-
day), will help you to reduce energy consump-
tion. The fridge door however must be kept
closed.
By turning the knob clockwise you will pro-
gressively cool down the fridge. Position 5 is
the coldest setting possible.
If neither the fridge nor the freezer are being
used (i.e. The appliance switched off), both
doors should be left open. This will help to
avoid any possible smells caused by high
levels of humidity.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Electrolux enb3669 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Electrolux enb3669 in the language / languages: English as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info