18
Installation
Fig. 1
Fig. 3
Fig. 2
PPoossiittiioonniinngg
• Place the refrigerator away from direct sunlight
and heat sources.
• Take off at least 50 mm. free over the appliance.
• Never put something on the ventilator of the
appliance. (see fig. 1).
• Make sure the refrigerator is accurately levelled
turning the adjustable feet on the front, in order to
avoid vibrations and noises and to make sure that
the doors shut properly (see fig. 2).
• The appliance should not be located in places with
maximum temperatures more than 38ºC:
If the temperatures are higher the functioning and
the safety of the appliance could be affected.
• Assemble the spacers that you can find in the
documentation badge as shown in the figure 3.
CClleeaanniinngg tthhee iinntteerriioorr
• Do not use alcohol or any cleaning produts contai-
ning alcohol because they could damage the plas-
tic parts of the appliance.
• Before using the appliance for the first time, wash
the interior with luke warm water and a neutral
soap. This will help to remove the typical smell of
a new fridge/freezer. Afterwards dry thoroughly.
• Do not use detergents or abrasive powders as
these will damage the finish.
• Remove security elements used for transportation.
EElleeccttrriiccaall ccoonnnneeccttiioonn
mBefore plugging the appliance into a socket make
sure that the voltage and frequency shown on the
rating plate correspond to your home supply. (see
fig.4).
It is essential that the appliance should be properly
earthed.
mFor this purpose the supply cable plug incorpora-
tes a special earth contact. If the sockets of your
domestic wiring system are not earthed, have the
appliance connected to a separate earth wire in
accordance with existing safety regulations.
