521177

Electrolux EHH9967FOG Manual

29
Zoom out
Zoom in
Previous page
1/80
Next page
•
To set the cooking zone: touch
again and again until the indicator of the
necessary cooking zone comes on.
When this function is activated,
comes on.
•
To activate the Count Down Timer:
touch
of the timer to set the time (
00
-
99
minutes). When the indicator
of the cooking zone starts to flash slow-
ly, the time counts down.
• To see the remaining time: set the
cooking zone with
. The indicator of
the cooking zone starts to flash quickly.
The display shows the remaining time.
• To change the Count Down Timer:
set the cooking zone with
and touch
or .
• To deactivate the Count Down
Time: set the cooking zone with
and touch . The remaining time
counts down to
00
. The indicator of
the cooking zone goes out.
When the timer countdown comes to an
end, the sound operates and
00
flash-
es. The cooking zone deactivates.
•
To deactivate the sound: touch
.
The Count Up timer
Use the Count Up timer to monitor how
long the cooking zone operates.
•
The selection of the cooking zone
(if more than 1 cooking zone oper-
ates): touch
again and again until
the indicator of the necessary cooking
zone comes on.
When this function is activated,
comes on.
•
To activate the Count Up timer:
Touch
.
The symbol
goes out and comes
on.
•
To see how long the cooking zone
operates: set the cooking zone with
. The indicator of the cooking zone
starts to flash quickly. The display
shows how long the zone has operat-
ed. During the first minute the display
shows the time in seconds, and after
the first minute the display shows the
time in minutes. The display shows the
length of time of the cooking zone
which has operated for the longer peri-
od of time.
• To deactivate the Count Up timer:
set the cooking zone with
and touch
or to deactivate the timer. The
symbol
goes out and comes on.
When the two Timer functions op-
erate at the same time, the display
shows the Count Up Timer first.
The Minute minder.
You can use the timer as the minute
minder when the cooking zones are not
in operation. Touch
.
Touch
or of the timer to set the
time. When the time comes to an end, the
sound operates and
00
flashes.
•
To stop the sound: touch .
4.10 STOP+GO
The function sets all cooking zones
that operate to the lowest heat setting (
).
When
operates, you cannot change
the heat setting.
The
function does not stop the timer
function.
•
To activate this function touch
.
The symbol
comes on.
•
To deactivate this function touch .
The heat setting that you set before
comes on.
4.11 Lock
When the cooking zones operate, you
can lock the control panel, but not
. It
prevents an accidental change of the heat
setting.
First set the heat setting.
To start this function touch
. The sym-
bol
comes on for 4 seconds.
The Timer stays on.
To stop this function touch
. The heat
setting that you set before comes on.
When you stop the appliance, you also
stop this function.
ENGLISH 29
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Electrolux EHH9967FOG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Electrolux EHH9967FOG in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 18,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info