Manual Electrolux EHG 6430 (page 15 of 48) (English, German, Dutch, French)

451957

Zoom out

Zoom in

1/48

• Use the correct mains connection cable

and replace the damaged mains cable

with applicable cable. Speak to your local

Service Force Centre.

• The appliance must have the electrical in-

stallation which lets you disconnect the

appliance from the mains at all poles with

a contact opening width of minimum 3

mm.

• If the fixing bracket is near to the terminal

block, always make sure the connection

cable does not come in contact with the

edge of the bracket.

• You must have correct isolation devices:

line protecting cut-outs, fuses (screw

type fuses removed from the holder),

ground leakage trips and contactors.

Disposal of the appliance

• To prevent the risk of physical injury or

damage

– Disconnect the appliance from the

power supply.

– Cut off the mains cable where it con-

nects with the appliance and discard it.

– Flat the external gas pipes if there are

fitted.

– Speak to your local authorised facilities

for disposal of your appliance.

INSTALLATION

Warning! The following instructions

about installation, connection and

maintenance must be carried out by

qualified personnel in compliance with

standards and local regulations in

force.

Gas Connection

It is necessary that the connection to the

gas mains are carried out by means of an

AGB tap. Choose fixed connections or use

a flexible pipe in AGB (stainless steel) in

compliance with the regulation in force. If

you use flexible metallic pipes, be careful

they do not come in touch with mobile

parts or they are not squeezed. Also be

careful when the hob is put together with

an oven.

The connection must be done according to

regulation NBN D 5I.003.

Important! Make sure that the gas supply

pressure of the appliance obeys the

recommended values. The adjustable

connection is fixed to the comprehensive

ramp by means of a threaded nut G 1/2".

All the components shown in the figure

have already been assembled in the

factory. The appliance, before leaving the

factory, has been tested in order to give

you the best results.

1 End of shaft with nut

2 Washer

3 Elbow

Flexible nonmetal pipes connection:

If it is possible to easily control the connec-

tion in its full area, you can use a flexible

pipe. Tightly attach the flexible pipe by

clamps.

Liquid gas: use the rubber pipe holder. Al-

ways engage the gasket. Then continue

with the gas connection. The flexible pipe is

prepared for apply when:

– it can not get hot more than room tem-

perature, higher than 30°C;

– it is no longer than 1500 mm;

– it shows no throttles;

– it is not subject to traction or torsion;

– it does not get in touch with cutting

edges or corners;

electrolux 15

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Electrolux EHG 6430 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,99 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Electrolux EHG 6430 Manual

Product: