129350
73
Zoom out
Zoom in
Previous page
1/80
Next page
GEBRUIK electrolux 73
NL
Toets Basisfunctie Lichtsignalen
Dubbele Functie
L
Als U deze toets even indrukt, wordt de verlichting aan- of
uitgeschakeld.
Led uit Lichten uit
Als U deze toets 2 seconden ingedrukt houdt, wordt er
een “beleefdheidsverlichting” aangeschakeld. De lampen
branden dan met een gereduceerd vermogen van ongeveer
5W. Deze functie kan weer uitgeschakeld worden door de
toets opnieuw gedurende 2 seconden ingedrukt te houden
of door even op de toets te drukken en zo over te schakelen
naar de normale lichtintensiteit. Als deze beleefdheids-
verlichting brandt, is de led uit.
Led brandt Lichten aan
Led uit Beleefdheidsverlichting aan
T1
Schakelt de zuigmotor uit van op elke ingestelde snelheid Led brandt Motor aan
Led uit Motor uit
T2
Activeert de zuigmotor in de eerste snelheid
Led brandt
T3
Als U deze toets even indrukt, activeert U de zuigmotor in de
tweede snelheid
Led brandt De tweede snelheid is actief
Als U deze toets ongeveer 2 ‘’ ingedrukt houdt, activeert U
de Delay functie, dit staat voor een vertraagde uitschakeling
van het toestel. Deze functie is zeer geschikt om restgeurtjes
te verwijderen. De Delay functie kan geactiveerd worden
als het toestel UIT staat, of als het werkt op de 1ste, 2de of
3de snelheid; U kan de functie voortijdig uitschakelen door
eender welke toets (T) in te drukken, met uitzondering van
toets T3. De vertraagde uitschakeling gebeurt volgens het
volgende schema:
1° snelheid / UIT = 20 minuten
2° snelheid = 15 minuten
3° snelheid = 5 minuten
Led knippert De vertraagde
uitschakelingsfunctie is actief
T4
Activeert de zuigmotor in de derde snelheid
Led brandt
T5
Activeert de zuigmotor gedurende 5 minuten in de intensieve
snelheid. Na aoop van deze 5 minuten, schakelt het toestel
over op de daarvoor ingestelde snelheid. Als U de wasemkap
meteen instelde in de intensieve snelheid, dan schakelt het
systeem na 5 minuten over op de eerste snelheid.
Led brandt
F
Als U deze toets gedurende 4 seconden ingedrukt houdt,
wordt het alarmsignaal voor de lters hernomen en begint toets
T1 te knipperen. Deze procedure is alleen mogelijk als de
zuigmotor uitgeschakeld is.
Led brandt Signaleert het alarm verzadiging
metalen vetlters, wat inhoudt
dat deze moeten worden
schoongemaakt. Dit alarm wordt
geactiveerd na 100 effectieve
werkingsuren van de wasemkap.
Led knippert
Signaleert, wanneer hij
geactiveerd wordt, het
alarm verzadiging actieve
koolstoflter, wat inhoudt
dat deze lter moet worden
vervangen; ook moeten
de metalen vetlters
worden schoongemaakt.
Het alarm verzadiging
actieve koolstoflter
wordt geactiveerd na 200
effectieve werkingsuren van
de wasemkap. (Voor de
activering van het alarm zie
paragraaf Geurlters)
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Electrolux efa9620x at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Electrolux efa9620x in the language / languages: English, German, Dutch, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 4,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info