Manual Electrolux eea 120 (page 32 of 172) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

362297

Zoom out

Zoom in

1/172

0 Remove the plastic attachment and

rinse both under running water

(figure 14).

0 Place the plastic attachment back into

the drip tray.

0 Push the clean drip tray back into the

appliance and place the drip grating

back in.

Cleaning the brew filter

From time to time check the brew filter

to ensure that the holes in the filter

have not become blocked by coffee

particles. The brew filter is located on

the underside of the brew head.

If the holes have become blocked:

0 Unscrew the brew filter using a coin

(figure 15).

0 Remove the brew filter and seal

(figure 16/1) and remove the brew fil-

ter’s seal (figure 16/2).

0 Clean the brew filter with warm water

and a brush.

0 Rinse the seal with warm rinse water.

If the appliance is to be transported at

temperatures below zero:

0 Empty the water tank.

0 Turn the selector dial (figure 1/E) to

the position and let the appliance

dry.

Decalcifying

If the espresso is flowing through the

filter at a slower rate than usual, it is

time for the appliance to be decalci-

fied.

We recommend that you decalcify the

machine once every three months. If

you live in an area with hard water the

decalcifying procedure may have to be

carried out more often.

We recommend to use only the original

Electrolux decalcifying tabs

(PNC 900 195 537/7).

Important: Prior to decalcifying, re-

move the brew filter (figure 1/T) and

the brew filter’s seal, as described in

the section “Cleaning the brew filter”

(figures 15, 16).

First pour the water into the water

tank, then add the decalcifier; never in

the reverse order. At least 0.5 litres of

water must be used. The decalcifier

should be added accordingly.

0 Remove the power plug from the

power point and allow the appliance to

cool.

0 Place the filter holder in position with-

out the filter.

0 Place a sufficiently large container

under the filter holder.

0 Insert the power plug into the power

point and switch on the appliance.

0 Afterwards, turn the selector dial (fig-

ure 1/E) to the position and let

approx. 1/3 of the decalcifier flow

through the system.

0 Then switch off the appliance and

allow the decalcifying solution to act

for approx. 10 minutes.

0 Allow the rest of the decalcifying solu-

tion to rinse the brew head.

0 Then thoroughly clean the water tank.

0 Fill the water tank with fresh water

and allow all of the water to flow over

the brew head.

Repeat the procedure if there is a lot of

limescale.

0 After decalcifying the appliance,

replace the brew filter and seal.

What to do if…

• the espresso temperature is too low:

– Carry out the brewing procedure

without using espresso grounds, but

using the filter and filter holder, in

order to preheat the system.

–Preheat the cups.

– Decalcify the appliance.

• the flow speed decreases noticeably:

– Do not press the espresso grounds

too firmly into the filter.

– Do not grind the espresso grounds

too finely (“medium” fineness).

– Decalcify the appliance.

822_949_384 EEA120_130_Elux.book Seite 32 Freitag, 28. Dezember 2007 5:42 17

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Electrolux eea 120 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Electrolux eea 120 Manual

Product: