303816
55
Zoom out
Zoom in
Previous page
1/60
Next page
Minuterie (Time) buttons simultaneously for 5 sec-
onds.
The symbol
on the display means that the child
lock is active.
Any changes of drying parameters require
child lock deactivation.
The child lock cannot be deactivated in the last
phase of the drying cycle.
Starting the programme
Press the Départ/Pause (Start/Pause) button. The
programme starts.
The programme progress is shown by elapsing dry
time on the LCD.
Changing programme
To change a programme which has been selected
by mistake once the programme has started, first
turn the programme selector to
off and then
reset the programme.
The programme can no longer be changed
directly once the programme has started. If
nevertheless there is an attempt to change the
programme on the programme knob, the pro-
gramme progress display and the maintenance in-
dicators flash. If an option button (excluding the
Alarme (Buzzer) button) is pressed,
appears
on the display. The drying programme is not how-
ever affected by this (laundry protection).
Drying cycle complete / removing laundry
Once the drying cycle is complete, the display
shows the anti-crease icon and flashing
as well as warning lamps: filter and
full tank . If the Alarme (Buzzer) button has been
pressed, an acoustic signal sounds intermittently
for about one minute.
The drying cycles are automatically followed
by an anti-crease phase which lasts around
30 minutes. The drum rotates at intervals during
this phase. This keeps the laundry loose and free
of creases. The laundry can be removed at any
time during the anti-crease phase. (The laundry
should be taken out towards the end of the anti-
crease phase at the latest to prevent creases from
forming.)
1. Open door.
2. Before removing the laundry, remove fluff from
the micro-fine filter. It is best to use a damp
hand for this purpose. (See “Maintenance and
cleaning” chapter.)
3. Remove laundry.
4.
Turn the programme selector to
off .
Important! After each drying cycle:
- Clean the micro-fine filter and fine filter
- Drain the condensed water container
(See chapter “Maintenance and cleaning ”.)
5. Close the door.
Cleaning and maintenance
Cleaning fluff filters
The filters collect all the fluff which accumulates
during drying. To ensure that the dryer works per-
fectly, the fluff filters (fine filters and fluff filters) must
be cleaned after each drying cycle.
Caution! Never operate the dryer without
fluff filters or with damaged or blocked fluff
filters.
3 4
21
1 2
3 4
electrolux 55
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Electrolux edh 97980 w at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Electrolux edh 97980 w in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 13,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info