15
ENGLISH
The duration value will be gradually adjusted
during the execution of the drying cycle.
7. Press the SPIN button repeatedly, in order to
select the real spin speed that your laundry
has been spun. The selected spin level will
be shown on the third row above to the spin
button.
8. Press the «Options» button to select the
required options.
To confirm your choice press the “Wijzigen”
button.
Depending on the selected programme
only certain options are available and
shown during the selection phase.
Note: Not all the options are compatible
between themselves. The incompatible
option icons will disappear.
9. Select the DELAY START option if required.
Before you start the programme choose the
required option.
The selected delay time value (up to 20
hours) will appear on the display while
selecting.
The end cycle will be updated and shown on
the relative position of the display.
10. Press the Start/Pauze button. The
relevant light will stop flashing. The message
relevant to the phase that is in progress will
be shown in the display.
If you have chosen a delayed start, the
tumble dryer will begin the countdown.
If the programme selector dial is turned to
another position, when the machine is
running, the buzzer will sound and the
«Selection error» message appears in the
display.
The drum turns alternately in both directions
during drying.
All drying programmes end with a 10 minute
cooling phase (on the second row of the
display appears the «Cooling» message).
You may remove the laundry after this phase.
The display shows the following messages
one after an other: «Please clean the filters»
and «Please empty the tank». The buzzer
sounds to indicate the end of the cycle.
11. If the laundry is not removed at the end
of the cycle, the dryer performs an anti-
creasing phase (duration: 30 minutes
maximum).
If you do not remove the laundry, the dryer will
stop automatically at the end of the anti-
creasing phase. The display will show the
following messages one after an other:
«Anticrease», «Please clean the filters»
and «Please empty the tank». The buzzer
sounds to indicate the end of the cycle.
The light of the Start/Pauze button goes off
and a flashing zero appears on the display.
