Manual Electrolux ASB 8000 (page 32 of 140) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

77853

Zoom out

Zoom in

1/140

0 Insert the blade assembly into the

blender tank from the bottom. Turn

it clockwise to fasten it (Fig. 5).

Caution! Handle carefully!

You can use the filler cup as tool.

The blender tank will leak if the

blade assembly is not assembled

correctly.

0 Seat the tank on the motor hou-

sing.

0 Set the lid on the blender tank.

0 Insert the filler cup, and lock it in.

Operating the Blender

Place the blender on a level, dry

surface.

0 Plug the power cord into a power

outlet.

0 Open the lid (Fig. 1/B) and put all

the required ingredients in the

blender tank.

Important! Do not exceed the

maximum capacity of 1.6 litres.

You can add other ingredients

through the filler hole while the

blender is running. You can use the

filler cup in the lid to do this (Fig. 1/

A). Close the filler hole immediately

after, to avoid splashing.

Do not start the blender without

the lid (Fig. 1/B) in position.

Although the lid fits firmly to the

blender tank, we advise when

blending liquid ingredients, to

place your hand on the lid as you

initially start blending. As the pow-

erful motor could cause the liquid

to surge up causing leakage. Once

you have started blending you can

remove your hand.

0 Start the blender by turning the

Speed Selector (Fig. 1/G) to the

right, or by pressing the PULSE

Button (Fig. 1/H).

We recommend starting with

blender Speed 1, then progressing

to Speed 2 or 3. The PULSE But-

ton runs the blender at full speed.

The „Blending guide“ on page 34

shows the functions that can be

performed and the suggested

speeds to use.

0 After you have completed blen-

ding, turn the Speed Selector off to

position .

0 After mixing, first remove the blen-

der tank, before taking off the lid.

Do not let the blender run for more

than 2 minutes at a time using

heavy loads. After running for 2

minutes with heavy loads, the

blender should be left to cool for at

least 10 minutes.

Safety System

The safety system prevents the

blender from being operated if the

blender tank is not correctly

seated.

You should nevertheless still keep

children away from the appiance.

Ice crushing

The blender can be used for crush-

ing ice.

0 Simply add ice to the blender then

press the PULSE button and hold

for 1-2 seconds and release.

Continue this process and in sec-

onds your ice is crushed.

Processing hot liquids

If you would like to process hot liq-

uids please allow to cool down

until lukewarm, fill the blender tank

only half full and start processing

on low speed.

822 949 412_ASB8000.book Seite 32 Donnerstag, 29. Mai 2008 8:18 08

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Electrolux ASB 8000 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Electrolux ASB 8000 Manual

Product: