632961

Electric Mobility Rascal 600F Manual

25
Zoom out
Zoom in
Previous page
1/42
Next page
Rascal R600 Scooter Owner’s Manual
EMC Part: 19271200 • Rev. 03 • 06/01/2003
20
Driving
Once seated on your Rascal scooter, driving is simple. Set Speed Dial to desired speed range. Use the
Engager Lever to move forward (squeeze right side) or reverse (squeeze left side) Steer in the desired
direction. Before driving, however, you should confirm the following recommendations are followed.
•Tiller and dash are locked in position, facing the operator.
• Seat is locked in forward position.
•Green Status Lamp is not flashing
•Armrests are lowered into driving position.
• Key is in switch and in “On” position.
Braking System
Whenever the engager lever is moved out of the neutral position, the electromagnetic brake will
automatically release and your scooter will move. When the speed engager lever is released, it will
return to the neutral position and the scooter will decelerate with regenerative braking and come to a
complete stop. The parking brake will then engage preventing further movement of your scooter. If your
scooter ever moves in an unexpected manner, release the speed engager lever. Once the scooter has
come to a complete stop turn off the power.
Your unit is equipped with a controller that has a high pedal disable safety feature. This will prevent
unexpected acceleration of the scooter, if the speed engager lever is activated at the same time you
turn the key ON. To reset the controller, release the speed engager lever and turn the key OFF for 3-5
seconds and then turn it back ON.
Safety Feature: There is a time delay between the release of the engager lever and when the parking
brake automatically activates. This delay allows your vehicle to gradually slow down before the parking
brake activates so you will come to a smooth stop.
Speed Settings
The top forward/reverse speed of the vehicle is selected from the Dial-A-Speed knob on the dash.
Lower settings, 1, 2 (indicated by the turtle symbol) result in slower speeds. Higher settings 9-10
(indicated by the rabbit symbol) provide faster speeds.
When first operating your vehicle, select slower settings to operate the unit until you feel comfortable.
Freewheel Operation
The scooter features a “freewheel” mode to allow it to be pushed by hand (manual operation). To
activate manually, turn the key switch OFF and locate the brake release lever under the rear cover on
the right side. Push lever up to disengage the parking brake. Move lever down to engage the parking
brake. When your vehicle is in manual push mode, parking and regenerative brakes will not operate.
The Brake Release lever is shown in Illustration 12.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Electric Mobility Rascal 600F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Electric Mobility Rascal 600F in the language / languages: English as an attachment in your email.

The manual is 6,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info