646321
57
Zoom out
Zoom in
Previous page
1/66
Next page
ULTRAMAX PB 65 - 120
57 L290 ©MHS Boilers 13/12/2010
Ultramax PB Supplementary Information For OCI420 LPB
Communication Installation Including LMU64 and RVA47 Controller
reprogramming. (Part Code. 96.38000-7004)
Following the installation of the OCI420 LPB communication clip (complete with base mounted wiring
connection) onto the front of the LMU64 controller a number of operational parameters within the unit must be
altered to ensure the clips operates as required.
LMU64 Pictured above with AGU2.511 and OCI420 communication clips.
A number of parameters will require altering within the LMU64 controller from their standard default setting to
allow the OCI420 communication clip to operate correctly.
Access is gained to the H parameters by pressing the PROG ▲▼ buttons simultaneously for 3 seconds unit
H 90 appears on the screen. The required H parameters can then be reached by using the PROG ▲. Or
PROG ▼buttons. Once at the required H parameter the required setting is achieved by using the + - buttons.
To save the alteration in the controller the INFO button must be pressed.
A number of parameters will require altering within the RVA47 cascade controller from their standard default
setting to allow the RVA47 to operate correctly.
Access is gained to the operational parameters of the RVA47 cascade controller by pressing the PROG ▲▼
buttons simultaneously for 3 seconds unit 51 appears on the screen. The required parameters can then be
reached by using the PROG ▲. Or PROG ▼buttons. Once at the required parameter the required setting is
achieved by using the + - buttons. To save the alteration in the controller the AUTO button must be pressed.
Please note that the QAC32 outside air sensor must be connected to the RVA47 cascade controller.
L OCI.
LMU
Parameter #
Description
Default
New Setting
H516
External temperature at which the boiler ceases to
operate in heating mode. Summer / Winter changeover
temperature.
18
30
H552
System hydraulic configuration.
66
80
H605
Boiler positioning in cascade
1
Boiler # 1 = 2
Boiler # 2 = 3
etc up to boiler #12 = 13
RVA47
Parameter #
Description
Default
New Setting
16
External temperature at which the boilers cease to
operate in heating mode. Summer / Winter changeover
temperature.
17
30
140
Cascade Communication Master Configuration
1
1
141
Cascade communication Master Configuration
0
0
148
Cascade communication Clock Configuration
3
3
Appendix C
Cascade wiring connection point
X41. Polarity must be observed.
57


Need help? Post your question in this forum.

Forumrules
1

Forum

elco-ultramax-pb-65---120

Reset search

  • What is the fault code 153 on ultramax pb 120 boiler Submitted on 10-12-2021 at 10:53

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elco Ultramax PB 65 - 120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elco Ultramax PB 65 - 120 in the language / languages: English as an attachment in your email.

The manual is 3,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info