646322
22
Zoom out
Zoom in
Previous page
1/46
Next page
4
3
2
1
7
6
5
Installa on
24
Flue terminal
Installa on of horizontal ue terminal
Before installing the terminal
Before assembling the ue terminal,
it is rst necessary to perform the fol-
lowing opera ons:
Check the ue terminal for possi-
ble damage.
Determine the proposed loca on
of the ue terminal
Drill a hole through the wall of a
max. of 10mm wider then the air
supply pipe for the ue terminal.
Horizontal ue terminal with ex-
ible exterior gaskets can be in-
stalled inside out, in which case
the drilled hole must be 25mm
wider then the diameter of the air
supply pipe.
Take due care to protect the appli-
ance from dust and grit during drill-
ing
Installing the ue terminal
Determine the thickness of the wall
and cut i necessary the wall terminal
to the corrisponding length. Remove
the burs. A en on! The length is
correct if the outer wall plate or ro-
se e are ush with the outside wall.
Insert the ue terminal into the
drilled hole. The air supply pipe for
the ue terminal must either be in-
stalled level or lted slightly down-
wards to the outside (max. 10mm
per meter).
To prevent rainwater from penetrat-
ing the system, ensure that the e
terminal is never installed up side
down.
Close the gap between the air intake
pipe and rhe hole in the wall with wa-
ter resistant sealant.
Install the rose es or wall plates
around the ue terminal and a ach
with screws or mas c.
Connec ng the ue
Connect the appliance to the terminal.
Start at the outlet of the appliance.
Don’t use soap, oil lubricant!Use only
water for lubrica ng the seals.
Important
Install products according to Na onal
Regula ons. Cleaning is possible with
a wet cloth moistened with a mild
detergent if necessary.
Part list:
1. Horizontal ue terminal
2. Wall plate or rose e
3. Concentric bend
4. Locking bend (op onal)
5. Flue pipe
6. Air inlet pipe
7. Twin pipe connec on.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elco THISION L EVO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elco THISION L EVO in the language / languages: English as an attachment in your email.

The manual is 8,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info