569767
51
Zoom out
Zoom in
Previous page
1/56
Next page
51
Bediening
Installatie en ingebruikstelling
Functies voor de extra relais
De multi-functierelais = MF-relais zijn
steeds met een basisfunctie bezet
MF-1: Mengklep SK1 OPEN
(FUNC RELAIS1 = 00)
MF-2: Mengklep SK1 DICHT
(FUNC RELAIS2 = 00)
MF-3: Collectorpomp
(FUNC RELAIS3 = 01)
MF-4: Circulatie (tijd)
(FUNC RELAIS4 = 02)
Als deze basisfunctie van een
MF-relais niet nodig is (configuratie van
de installatie in het Installatie-menu),
kan voor elk vrij relais een van de
hieronder beschreven functies gekozen
worden.
Aan elk MF-relais 1-4 (A8-A11) is een
voeler 1-4 (F11-F14) toegewezen
(geldt alleen voor functies vanaf "20").
Is er voor een functie nog een voeler
nodig, dan moet deze als F17
aangesloten worden (stekker III,
pin 2+3).
De voor de MF-relais 1-4 selecteer-
bare functies zijn hieronder als
voorbeeld voor het MF-relais 1
beschreven.
FUNC RELAIS1 (functiekeuze relais
MF1)
MF1 T-NOM (schakeltemperatuur
relais MF1)
MF 1 HYST (Hysteresis relais MF1)
00 = geen MF-functie
01 = collectorpomp
AAN: Bij warmtevraag door een
verbruiker
UIT: Zonder warmtevraag van een
verbruiker
Bij warmtevraag van ten minste een
verbruiker in de installatie wordt de
pomp ingeschakeld. Na het
uitschakelen van de brander werkt de
naloopfunctie.
02 = Circulatie (tijd)
Schakeling van het relais na het
tijdprogramma voor de circulatiepomp
03 = Voedingspomp
AAN: Bij warmtevraag van een
interne verbruiker
OFF: Zonder warmtevraag van een
interne verbruiker. Er vindt een
pompennaloop plaats.
05 = Pomp WP1
Het relais kan voor de aansturing van
de ketelpomp voor de warmtebron 1
gebruikt worden.
(Relais schakelt tegelijk met
branderrelais 1; naloop=5 min)
06 = Pomp WP2
Bij gebruik van de regeling voor de
aansturing van twee warmtebronnen
kan het relais voor de aansturing van
de WP-pomp voor WP 2 worden
gebruikt.
(Relais schakelt tegelijk met
branderrelais 2; naloop=5 min)
20 = Temperatuurgestuurde
circulatiepomp
T-CIRCULATIE = retourtemperatuur
van de circulatieleiding
AAN: T-CIRCULATIE < MF1 T-NOM
UIT: T-CIRCULATIE >
[MF1 T-NOM + MF1 HYST]
De circulatiepomp wordt ingeschakeld
als de retourtemperatuur onder de
ingestelde grenstemperatuur
(MF1 T-NOM) komt. De pomp wordt
weer uitgeschakeld als de retour-
temperatuur weer boven de hysteresis
(MF1 HYST) komt.
Het ingestelde circulatieprogramma
heeft evenals de instelling "circulatie
met warmwater" voorrang
=> Inschakeling vindt alleen plaats
gedurende de vrijgaveperioden.
21 = Circulatiepomp via impuls
AAN: Bij kortsluiten van de
toegewezen voeleraansluiting
UIT: Na 5 minuten
Bij kortsluiten van de voeleringang
voor de multi-functievoeler wordt de
circulatiepomp gedurende 5 minuten
ingeschakeld. Het inschakelen gebeurt
eenmalig bij het geven van een puls.
Het ingestelde circulatieprogramma
heeft evenals de instelling "circulatie
met warmwater" voorrang
=> Inschakeling vindt alleen plaats
gedurende de vrijgaveperioden.
22 = Integratie van vaste brand-
stofketel
(bijv. in combinatie met 2-traps WP)
T-MF1 of 1-4 = temperatuur van de
vaste brandstofketel
T-BUFFER O = temperatuur van het
boilerbuffervat bij inlaat [F1]
AAN: T-MF1 > [T-BUFFER O (F1) +
MF1 HYST + 5K]
UIT: T-MF1 < [T-BUFFER O (F1) +
MF1 HYST]
Opwarmontlasting:
AAN: T-MF1 > MF1 T-NOM
UIT: T-MF1 < [MF1 T-NOM – 5K]
De pomp wordt ingeschakeld als de
temperatuur van de vaste brand-
stofketel de temperatuur van het boiler-
buffervat bij de inlaat [T BUFFER O
(F1)] met de hysteresis [MF1 HYST +
5K]overschrijdt. Het afschakelen
gebeurt als de temperatuur 5K onder
deze inschakeltemperatuur komt.
Aanduiding Instelbereik Standaard EW
FUNC RELAIS (1-4) 00 - 26 00,00,01,02
MF(1-4) T-NOM 30°C – 90°C 30°C
MF(1-4) HYST 2K – 10K 5K
FUNCTIE F15 00 - 02 00
Zonne-energie / MF
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elco KKM8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elco KKM8 in the language / languages: Dutch as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info