561013
29
Zoom out
Zoom in
Previous page
1/36
Next page
操作控制和端子连
操作控制和端子连操作控制和端子连
操作控制和端子连
29
1. 低音炮电平
低音炮电平低音炮电平
低音炮电平
经过调节, 低音炮的音量控制可与高保真或者家庭影院系统的主音箱音量相匹配。通常,不应由低音炮决定
声音。低音过度会导致声音结像差,并造成特定频率下出现令人不悦的谐振。
2. 低通分音器
低通分音器低通分音器
低通分音器
用于低音分音。高频率信号渐,就不主音成干扰。频率
节效果取决于主音箱的大小和频率响应情况。
音箱配置 分音器频率
LFE 通道的家庭影(5.1 …)
120 - 160 Hz
音箱很小的高保真/立体声系统
80 - 120 Hz
采用环绕音箱和低音炮 (2.1) 的立体声系
80 - 120 Hz
采用型书音箱小型式音的高/体声
统(兼容大多数 ELAC 音箱)
50 - 80 Hz
3. 电源
电源电源
电源
电源开关位于低音炮背部。电源开关有三个位置:
AUTO
:自动位置。ELAC 低音炮处于待机模式(LED 指示灯亮,红色
LED 绿 15
LED 指示灯亮,红色)。
注意:如果仅在全音量下自动接通工作,请增大环绕接收器低音/LFE 电平,并将低音炮降低相同电平。这
样,低音电平不会发生任何变化,而且低音炮在低音量下自动接通。
ON:接通。
:接通。:接通。
:接通。低音炮连续工作(LED 指示灯亮,绿色)
OFF:断开。
:断开。:断开。
:断开。低音炮连续保持待机模式(LED 指示灯亮,红色)
如需完全断开低音炮,请切换至断开模式。一秒后可断开电源开关,不会产生任何噪声。
4. LED 指示灯
指示灯指示灯
指示灯
接通/待机 LED 指示灯。当设备接通电源时为绿色,处于待机模式时为红色。
5. 相位角
相位角相位角
相位角
通过相位控制旋钮调节相对于输入信号相位的声学相位。声学相位在 0°(含)到 180°(不含)之间。应
在试间确佳调果。相位节旋量程节时保持听地点达最高
输出时的调节效果。
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elac SUB 2025 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elac SUB 2025 in the language / languages: English, German as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info