561024
10
Zoom out
Zoom in
Previous page
1/16
Next page
10
Function
ELAC In-Ceiling loudspeakers are ideal for lightweight ceilings but also lightweight walls. The installation cover and the front
grille can be painted according to your requirements. This has to be done before the loudspeaker is installed.
ELAC In-Ceiling loudspeakers offer unobtrusive design and perfect sound for all applications from hi-fi to stereo, home
cinema to surround sound.
What is included with the product
As standard, this product includes:
1 fully assembled ELAC In-Ceiling loudspeaker
1 ELAC In-Ceiling installation template
1 small bag with accessory, including grille removal tool
1 safety instructions
1 manual
Requirements
The installation of In-Ceiling loudspeakers requires certain craft skills. Please refer to an expert if you require any help.
The following shall be used for the installation of this loudspeaker:
1 yardstick, 1 pencil, 1 sharp knife or (electrical) jig saw,
1 Phillips hand screw driver (size: 2), 1 strip-insulation pliers, 1 power drill with suitable drill
Connecting
ELAC In-Ceiling loudspeakers can be used with any conventional amplifier.
The connecting cable should run inside the wall. Cable ends with a length of approx. 35-40 cm will come out of the
installation hole.
Use flexible twin cables with a cross section of 2.5 mm² for a line length of approx. 5 m and cables with a cross section of 4
mm² for larger line lengths.
Please do not use NYM cables for the installation because they may become mixed up with buried wires .
Note: Mixing up the wires is extremely dangerous and can cause an electric shock!
Appropriate polarity must be ensured. The positive poles of the amplifier outputs (red terminals) have to be connected to the
positive poles of the loudspeaker inputs (red terminals). The same applies for all negative poles, that must be connected to
the black terminals. Correct polarity is extremely important for connecting the buried loudspeaker units to the amplifier.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elac IC1010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elac IC1010 in the language / languages: English, German as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info