495428
5
Zoom out
Zoom in
Previous page
1/40
Next page
5
Taking the temperature in SCAN mode:
While the thermometer is on, press and hold the ON/MEM button and at
the same time press the SCAN button once.
The icon shows in the display.
Hold the probe to the object and press the SCAN button to update the
actual temperature.
This mode can be used to measure water, milk, cloth, skin etc.
Note:
This mode gives the surface temperature which is dierent from the body
temperature.
To get the room temperature:
Program the thermometer according to the section “CLOCK SETTING”.
When the thermometer is not in use the display automatically shows the
room temperature in the display with the icon.
To get the correct room temperature, place the thermometer on a table
away from direct sunlight or air conditioning.
The correct room temperature will show after 15 min.
Scan button
After use
To extend battery life, the device will automatically turn o if not in use
for more than 1 minute. The LCD will display the date, time and room
temperature.
Clean the probe after each use to ensure an accurate reading and avoid
cross contamination. (See the section of Care and Cleaning for details.)
Use the probe cap when not in use.
Press and hold the ON/MEM” button and at the same time press the
“SCAN” button twice for stopwatch” mode.
Press the SCAN button to start or stop the counting. Press the ON/MEM
button to reset the counting.
Press and hold the ON/MEM” button and at the same time press the
“SCAN” button to exit stopwatch mode.
Use of stopwatch
Count the number of heartbeats in 15 seconds and multiply by 4 to get the total for 1
minute. The normal rate is 72 heartbeats per minute.
How to measure heartbeat
The probe is the most delicate part of the thermometer. Handle with care when
cleaning the lens to avoid damage.
After measurement, use a cotton swab with alcohol (70% concentration) to
clean the lens.
Allow the probe to dry completely for at least 1 minute.
Storage temperature range: -20~50°C (-4~122°F), RH≤85%
Keep the unit dry and away from any liquids and direct sunlight.
The probe should not be submerged in liquids.
Note:
If the device is dropped, please check that it is not damaged. If you are not sure if it is
damaged, please send the complete devise to the nearest retailer for recalibration.
If you hold the thermometer for a long time it may cause the devise to give a higher
room temperature reading. This can even aect body temperature measurement to be
lower than usual.
IMPORTANT: Care & cleaning
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eks Infrared Thermometer 0610 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eks Infrared Thermometer 0610 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 4,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info