810943
20
Zoom out
Zoom in
Previous page
1/32
Next page
20
SCREW LOADING (only if the stove is completely
without pellets)
To load the screw, enter the MENU by pressing the
key for 2 seconds; then press the key until
the message “M5 rst load” appears on the display.
Press the key to con rm, and then the key
to activate the function.
This operation must only be carried out when the
stove is o and completely cold.
Note: during this phase, the smoke extractor fan will
remain on.
STAND-BY FUNCTION
In this mode, the stove will go o when the temper-
ature of the environment is 0.5°C higher than that
requested, after a set time of 10 minutes (which can
be changed by the TAC during installation).
The message “GO STBY” will appear on the display,
indicating the minutes remaining before switch-o .
This function is available in both ‘AUTOMATIC
or ‘MANUAL mode and in the case of an external
thermostat.
If the environmental temperature falls to 2°C below
the set threshold, the stove will start up again (set-
ting modi able by the TAC during installation).
To activate the function, press the key for about
3 seconds; the message “M1 set clock” will appear
on the display; press the key until the message
“M4 stand by” appears on the display, then con rm
by pressing the key .
Press the key to select “ON”, then con rm by
pressing the key .
To quit the menu “M4 stand by”, press the key
for about 6 seconds.
SETTING THE DATE AND TIME
Press the key for about 2 second; the message
“M1 set clock” will appear on the display; then con rm
by pressing the key .
The following data will appear in sequence: Day of
the week, hour, minutes, day, month, year; these
can be changed by pressing the key or the key
. To con rm, press the key .
To quit the menu “M1 set clock”, press the key
for about 6 seconds.
EXTERNAL THERMOSTAT
This must be connected by the blue wire (optional
code 640560) to the serial port positioned on the
back of the stove; it must have a clean, normally
open contact (e.g. in the case of an environmental
thermostat):
- Open contact = Environmental temperature
reached
- Closed contact = Environmental temperature not
reached
To select ‘E-T’ (external thermostat) mode, press the
key (the LED will light up). Pressing the key
will lower the temperature until the message ‘E-T’
(external thermostat) appears on the display (below
6°).
Note: When the stove is o , the external thermostat
cannot switch the stove on or o .
If you want to switch the stove on or o outside the
set time or outside the ‘E-T’ (external thermostat)
setting, you must always do so using the key .
CHRONO-THERMOSTAT FOR DAILY/WEEKLY
PROGRAMMING
There are 3 types of programming (daily, weekly,
weekend), each of which is independent of the
others and thus many combinations are possible
according to the user's requirements (time program-
ming is in 10 minute steps).
Press the key for 2 seconds; the message “M1
set clock” will appear on the display (and the LED
will go out).
Press the key until the message “M2 set
chrono” appears on the display; con rm by pressing
the key .
To visualise the 3 programming modes (daily, weekly,
weekend) press the key or the key , and con-
rm by pressing the key
INSTRUCTIONS FOR USE
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for EK63-EdilKamin Spot 100H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of EK63-EdilKamin Spot 100H in the language / languages: English as an attachment in your email.

The manual is 2.19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of EK63-EdilKamin Spot 100H

EK63-EdilKamin Spot 100H Usermanual and installation guide - German - 32 pages

EK63-EdilKamin Spot 100H Usermanual and installation guide - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info