810956
18
Zoom out
Zoom in
Previous page
1/24
Next page
18
INSTALLATION
Facings, gather hood and vents
Facings, gather hood and vents
Face the product only after having completed the
Face the product only after having completed the
following steps:
following steps:
connecting the product to the smoke outlet and
connecting the product to the smoke outlet and
air intake;
air intake;
checking the correct operation of the appliance
checking the correct operation of the appliance
when hot. Perform checks on the appliance when
when hot. Perform checks on the appliance when
lit and after a few hours’ operation; check the
lit and after a few hours’ operation; check the
connections, the controls and all moving parts
connections, the controls and all moving parts
check that the appliance is level.
check that the appliance is level.
The installer must implement all the installation good
The installer must implement all the installation good
practices and take all the necessary precautions
practices and take all the necessary precautions
against overheating and re.
against overheating and re.
In particular:
In particular:
if a plinth is constructed beneath the hearth level,
if a plinth is constructed beneath the hearth level,
it must include a suitable slot for the passage of
it must include a suitable slot for the passage of
recirculation air from the room;
recirculation air from the room;
if the Air Di user Kit is installed, it must be
if the Air Di user Kit is installed, it must be
possible to inspect or replace the fans;
possible to inspect or replace the fans;
wooden parts must be protected with reproof
wooden parts must be protected with reproof
panels, which must not be placed against
panels, which must not be placed against
one another but spaced at least 1 cm apart to
one another but spaced at least 1 cm apart to
enable air to ow and prevent heat build-up.
enable air to ow and prevent heat build-up.
The gather hood can be made with reproof
The gather hood can be made with reproof
panels, plasterboard or gypsum slabs; during
panels, plasterboard or gypsum slabs; during
construction, the hot air ducting kit must be
construction, the hot air ducting kit must be
mounted as described above.
mounted as described above.
The interior of the gather hood should be aerated
The interior of the gather hood should be aerated
by exploiting the ow of air coming from below
by exploiting the ow of air coming from below
(the space between the door and mantel) which
(the space between the door and mantel) which
convective currents will cause to exit from the grille
convective currents will cause to exit from the grille
on top, thus allowing heat recovery and preventing
on top, thus allowing heat recovery and preventing
undue overheating.
undue overheating.
In addition to that mentioned above, take into account
In addition to that mentioned above, take into account
the
the regulations in force in the relevant country
concerning
“insulation, nishes, facings and safety
“insulation, nishes, facings and safety
recommendations”.
recommendations”.
Compensation vents
Compensation vents
It is essential to install them. We suggest installing
It is essential to install them. We suggest installing
them on the front: one beneath and one above the
them on the front: one beneath and one above the
combustion chamber opening.
combustion chamber opening.
Carry out all the nishing operations,
Carry out all the nishing operations,
for example the gather hood, the
for example the gather hood, the
cladding etc. only after the tests
cladding etc. only after the tests
have been completed successfully
have been completed successfully
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for EK63-EdilKamin Firek 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of EK63-EdilKamin Firek 1 in the language / languages: English as an attachment in your email.

The manual is 1.03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of EK63-EdilKamin Firek 1

EK63-EdilKamin Firek 1 Usermanual and installation guide - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info