522543
32
Zoom out
Zoom in
Previous page
1/52
Next page
32
Chapter 5 Troubleshooting
Problems Possible cause and remedy
4. Characters are blurred Check whether the signal setting of your PC matches
the resolution and the vertical frequency settings for
the monitor. (page 12)
Adjust using <Outline Enhancer>. (page 22)
5. Afterimages appear Afterimages are particular to LCD monitors. Avoid
displaying the same image for a long time.
Use the screen saver or power save function to avoid
displaying the same image for extended periods of
time.
6. Green/red/blue/white dots or defective dots
remain on the screen.
This is due to LCD panel characteristics and is not a
failure.
7. Interference patterns or pressure marks remain
on the screen.
Leave the monitor with a white or black screen. The
symptom may disappear.
8. Noise appears on the screen. When entering the signals of HDCP system, the
normal images may not be displayed immediately.
9. Display position is incorrect.
Adjust image position using <Hor.Position> or <Ver.
Position>. (page 16)
If the problem persists, use the graphics board’s utility
if available to change the display position.
10. Vertical bars appear on the screen or a part of the
image is ickering.
Adjust using [Clock]. (page 16)
11. Whole screen is ickering or blurring.
Adjust using [Phase]. (page 16)
12. Upper part of the screen is distorted as shown
below.
This is caused when both composite sync (X-OR)
signal and separate vertical sync signal are input
simultaneously. Select either composite signal or
separate signal.
13. The adjustment menu does not appear. Check whether the operation lock function works.
(page 25)
14. Mode menu does not appear. Check whether the operation lock function works.
(page 25)
15. The auto adjust function does not work correctly. This function does not work when digital signal is
input.
This function is intended for use on the Macintosh and
on AT-compatible PC running Windows. It may not
work properly in either of the following cases. It does
not work properly when an image is displayed only
on a part of the screen (command prompt window,
for example) or when a black background (wallpaper,
etc.) is in use.
This function does not work correctly with some
graphics boards.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eizo FlexScAN sx2462w at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eizo FlexScAN sx2462w in the language / languages: English as an attachment in your email.

The manual is 3,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info