694714
24
Zoom out
Zoom in
Previous page
1/48
Next page
Function
Setting
Value
Description
Color Mode User1
User2
sRGB
Paper
Movie
DICOM
Select the desired mode according to the monitor application.
The color setting status can also be adjusted according to personal
preference. Select the mode for adjustment and perform adjustment
using the relevant functions.
Note
For details on the adjustment status of each mode, see 2-3.
Switching Display Modes (Color Modes)” (page 18).
Brightness 0 to 100
The screen brightness is adjusted by changing the brightness of the
backlight (light source from the LCD back panel).
Note
If the image is too dark even when the brightness is set to 100,
adjust the contrast.
Contrast 0 to 100
The brightness of the screen is adjusted by varying the video signal
level.
Note
A contrast of 50 displays every color gradation.
When adjusting the monitor, it is recommended to perform
brightness adjustment, which does not lose gradation
characteristics, prior to contrast adjustment.
Perform contrast adjustment in the following cases.
- If the image is too dark even when the brightness is set to 100
(Set the contrast to higher than 50.)
Temperature Off
4000 K to
10000 K
(in
increments of
500 K. 9300 K
is included.)
Adjust the color temperature.
The color temperature is normally used to express the hue of “White”
and/or “Black” with a numerical value. The value is expressed in
degrees “K” (Kelvin).
The screen becomes reddish at low color temperatures and bluish at
high color temperatures, similar to the temperatures of a ame. A gain
preset value is set for each color temperature setting value.
Note
The value shown in “K” is available only as a reference.
“Gain” allows you to perform more advanced adjustment.
If set to “Off, the image is displayed in the preset color of the
monitor (Gain: 100 for each RGB channel).
When the gain is changed, the color temperature setting changes
to “Off.
Gamma 1.8
2.0
2.2
2.4
Adjust the gamma.
While the brightness of the monitor varies depending on the input
signal, the variation rate is not proportional to the input signal.
Maintaining the balance between the input signal and brightness of
the monitor is referred to as “Gamma correction”.
Note
If "sRGB" is selected for the color mode, the gamma value is
xed to "sRGB".
If “Paper” is selected for the color mode, “Paper” is displayed for
the gamma value.
If “DICOM” is selected for the color mode, “DICOM” is displayed
for the gamma value.
Super Resolution Standard
Low
Off
Image blur can be reduced by enhancing its outline.
24
Chapter 3 Advanced Adjustment / Setting
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eizo FlexScan EV3285 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eizo FlexScan EV3285 in the language / languages: English as an attachment in your email.

The manual is 2,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Eizo FlexScan EV3285

Eizo FlexScan EV3285 Installation Guide - English, German - 4 pages

Eizo FlexScan EV3285 User Manual - German - 50 pages

Eizo FlexScan EV3285 Installation Guide - Dutch, French - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info