213429
27
Zoom out
Zoom in
Previous page
1/42
Next page
4. Troubleshooting
27
Problems Possible cause and remedy
3. Display position is incorrect.
Adjust image position so that it is displayed properly
within the display area using the <Position> adjustment
(page 16).
Adjust image position so that it is displayed properly
within the display area using the "Hor.Position" and "Ver.
Position" adjustment (page 16).
If the problem persists, use the graphics board’s utility if
available to change the display position.
4. Screen image displayed is smaller or larger than the
actual screen image.
Adjust the resolution using <Resolution> so that the
input signal resolution equals the resolution in the
resolution adjustment menu
(page 17).
5. Vertical bars appear on the screen or a part of the image
is flickering.
Adjust using <Clock>
(page 16).
6. The characters and images have several vertical bars on
their right side.
Adjust the characters and images using the
<Signal Filter>.
7. Whole screen is flickering or blurring.
Adjust using <Phase>
(page 16).
8. Characters are blurred.
Adjust using <Smoothing>
(page 24).
9. Upper part of the screen is distorted as shown below.
This is caused when both composite sync (X-OR)
signal and separate vertical sync signal are input
simultaneously. Select either composite signal or
separate signal
10.The screen is too bright or too dark.
Adjust <Brightness>. (The LCD monitor backlight has a
fixed life span. When the screen becomes dark or begins
to flicker, contact your local dealer.)
11.Afterimages appear.
Use a screen saver or off timer function for a long-time
image display.
Afterimages are particular to LCD monitors. Avoid
displaying the same image for a long time.
12.Green/red/blue/white dots or defective dots remain on
the screen.
This is due to LCD panel characteristics and is not a
failure.
13.Interference patterns or fingerprints remain on the
screen.
Leave the monitor with a white screen or a black screen.
The symptom may disappear.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eizo cg241w-bk at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eizo cg241w-bk in the language / languages: English as an attachment in your email.

The manual is 4,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info