Manual Einhell TH-CD 18-2 Li (page 18 of 92) (English, Danish, Swedish, Norwegian)

606177

Zoom out

Zoom in

1/92

- 18 -

6. Operation

6.1 Charging the battery (Fig. 2-3)

1. Take the battery pack (5) out of the handle

(Fig. 2), pressing the pushlock button (8) of

the battery pack as you do so.

2. Check that your mains voltage is the same as

that marked on the rating plate of the battery

charger. Plug the mains plug of the charger

(6) into the mains socket outlet.

3. Connect the charging cable (a) to the char-

ging adapter (7).

4. Both LEDs are lit. Push the charging adapter

(7) onto the battery pack (5). The green LED

extinguishes to indicate that the battery pack

is being charged. When the charging period

is completed after approx. 3 to 5 hours, both

LEDs will come on again. The battery pack

may become a little warm during the charging

process. This is normal.

If the battery pack fails to charge, check for the

following:

•

Voltage at the power socket

•

Good contact at the charging contacts of the

charging unit

If the battery pack still fails to charge, send

•

the charging unit

•

and the battery pack

to our customer service center.

To ensure that the battery pack provides long ser-

vice, you should take care to recharge it promptly.

You must recharge the battery pack when you

notice that the power of the cordless equipment

drops.

6.2 Torque setting (Fig. 4 / Item 1)

The cordless screwdriver is ﬁ tted with a mechani-

cal torque selector.

The torque for a particular screw size is set with

the setting ring (1). The torque is dependent on a

number of factors:

•

On the type and hardness of the material in-

volved

•

On the type and length of the screws used

•

On the requirements that the screw connec-

tion has to satisfy

The grating disengagement of the coupling in-

dicates that the selected torque level has been

reached.

Caution! Only ever adjust the setting ring

when the equipment is at a standstill.

6.3 Drilling (Fig. 4/Item 1)

For drilling purposes, adjust the setting ring for

the torque to the last setting “Drill”. In the drill

setting the slip coupling is non-functional. The

maximum torque is available for drilling.

6.4 Changeover switch (Fig. 5/Item 3)

The slide switch above the On/Oﬀ switch is for

setting the direction of rotation of the cordless

screwdriver and for preventing the cordless

screwdriver from being switched on inadvertently.

You can select between clockwise and counter-

clockwise rotation. To avoid causing damage to

the gearing, the direction of rotation must only be

changed when the screwdriver is at a standstill.

When the slide switch is in the middle position,

the On/Oﬀ switch is blocked.

6.5 On/Oﬀ switch (Fig. 5/Item 4)

Inﬁ nitely variable speed control is possible with

the On/Oﬀ switch. The further you push the

switch, the higher the speed of the cordless

screwdriver.

6.6 Changing the bit (Fig. 6)

Caution! Set the changeover switch (3) to its

center position whenever you carry out any work

(for example changing the tool, maintenance

work, etc.) on the cordless screwdriver.

•

The cordless screwdriver is fitted with a

quick-action chuck (2) with an automatic

spindle stop.

•

Open the chuck (2).

•

The chuck opening (a) must be large enough

to hold the tool (drill bit or screwdriver bit).

•

Select the suitable tool. Push the tool as far

as possible into the chuck opening (a).

•

Tighten the chuck (2) and then check that the

tool is secure.

6.7 Screwing

It is advisable to use self-centering screws (e.g.

Torx, cross recessed head) as these will enable

you to work safely and reliably. Always make sure

that the bit used is of the same size and shape as

the screw. Set the torque to suit the screw size as

speciﬁ ed in the instructions.

Anl_TH_CD_18_2_Li_SPK1.indb 18Anl_TH_CD_18_2_Li_SPK1.indb 18 11.03.14 16:3111.03.14 16:31

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Einhell TH-CD 18-2 Li in the language / languages: English, Danish, Swedish, Norwegian as an attachment in your email.

The manual is 1,13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Einhell TH-CD 18-2 Li

Einhell TH-CD 18-2 Li User Manual - German, Dutch, French, Italian, Portuguese, Spanish - 60 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Einhell TH-CD 18-2 Li Manual

Product: