Manual Einhell TC-HP 2042 PC (page 19 of 160) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

606013

Zoom out

Zoom in

1/160

- 19 -

•

Do not cover or modify the lance or the spray

nozzles in any way.

•

The pressure cleaner is designed to be used

with cold or lukewarm water (max. 60 °C); hig-

her temperatures can damage the pump.

•

Do not use water that is dirty, gritty or con-

tains any chemical products, as these could

impair operation and shorten the life of the

equipment.

Caution: Risk of explosion

Do not spray ﬂ ammable liquids.

Warning

Water that has passed through the non-return

valve is not drinkable.

Warning

If cleaning agent gets into contact with your skin

or into your eye, rinse immediately with lots of

clean water. Then consult a doctor or follow the

steps described on the safety data sheet or provi-

ded by the manufacturer of the cleaning agent.

5.2 Assembly

5.2.1 Assembling the equipment (Fig. 1)

Push the accessories holder (2) onto the high-

pressure cleaner (5). The holder can be used for

space-saving storage of the gun (8), the extensi-

on (9) and the high-pressure hose (15).

Note! Before using the pressure cleaner, make

sure that the high-pressure hose is completely

unwound.

5.2.2 Fitting the attachments (Fig. 2)

Before you use the high-pressure cleaner (5) you

must ﬁ rst fasten the extension (9) to the gun (8)

by pushing and twisting.

Then push the rotating nozzle (13) or the cleaning

agent container (10) onto the extension (9) by

means of the quick connection system.

Rotating nozzle

To remove particularly stubborn dirt, use the rota-

ting nozzle (13).

Solid cone / ﬂ at fan lance (14)

The shape of the water jet can be changed from

solid cone to ﬂ at fan by turning the nozzle (Fig. 8).

Cleaning agent container

You can adjust the quantity of cleaning agent you

want to add by turning (+ / -) on the setting wheel

(11). We recommend using the cleaning agent

sparingly.

5.2.3 Fitting the handle (Fig. 5)

Push the handle (1) onto the pressure washer (5)

and secure it using the 4 screws (long thread).

5.2.4 Assembling the terrace cleaner (Figs.

6-9)

Insert the extension for the terrace cleaner (16)

into the recess provided.

Then turn the terrace cleaner (16) over and insert

the two screws (short thread). Then place the

rotor (17) on the terrace cleaner (16) and secure

this by inserting the clip.

You can then attach the terrace cleaner (16) to

the extension (8) using the quick-lock system

(12).

5.2.5 Connecting the high-pressure hose

(Fig. 3/4)

Connect the high-pressure hose (15) to the gun

(8) and the high-pressure cleaner (5).

Note:

The connections for the high-pressure hose

and the accessories are equipped with a quick

connection system (12). To connect, simply push

the hose or the accessory onto the respective

connection. To remove, simply actuate the quick

connection system (12) and you can remove the

hose or the accessory.

Each time before ﬁ tting, always check that the

quick connection system (12) is correctly enga-

ged. Do this by pulling brieﬂ y on the hose or the

accessory.

5.2.6 Water inlet connector (Fig. 1/4)

The connection for the water inlet (4) is equipped

with a connector for standard hose coupling sys-

tems. Plug the hose coupling on the supply hose

(min. Ø 1/2“) to the water inlet connector (4).

Always use a reinforced hose with a standard

coupling for the water inlet. The hose should be at

least 6 m in length. (Not supplied)

A backﬂ ow preventer must be installed between

the drinking water and the pressure cleaner! Ask

your local plumber about this.

Anl_TC_HP_2042_PC_SPK7.indb 19Anl_TC_HP_2042_PC_SPK7.indb 19 15.04.15 12:5515.04.15 12:55

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Einhell TC-HP 2042 PC in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,17 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Einhell TC-HP 2042 PC Manual

Product: