Manual Einhell TC-HP 1435 (page 28 of 52) (English, Spanish)

735451

Zoom out

Zoom in

1/52

- 28 -

5.2.5 Electrical connections (Fig. 1)

•

Before you connect the equipment to the

power supply make sure that the data on the

rating plate are identical to the supply voltage.

•

If you use any extension cables, make sure

that they are suitable for outdoor use and

have large enough wires:

1 – 10 m: 1.5 mm²

10-30m: 2.5 mm²

•

Insert the power plug (8) on the power cable

(6) into the socket outlet.

6. Operation

The equipment consists of an assembly with a

pump, which is encased in a shock absorbing

housing. For an optimal working position the

equipment comes with a lance and a non-slip

gun, whose shape and conﬁ guration comply with

the applicable regulations.

6.1 Using for the ﬁ rst time

Once you have completely assembled the pres-

sure cleaner and made all the connections, pro-

ceed as follows:

Open the water inlet. Press safety pin „a“ (Fig. 2)

on the spray gun and pull back trigger lever „b“

(Fig. 2) in order to bleed the trapped air out of the

equipment.

Turn on the equipment by switching the On/Oﬀ

switch (Fig. 1/3) to “ON”.

To turn oﬀ , release the trigger lever (b). The

equipment will then go into standby. As soon as

you press the trigger lever (b) again, the pressure

cleaner will restart.

To turn oﬀ the pressure cleaner completely, set

the On/Oﬀ switch (Fig. 1/3) to “OFF”.

6.2 Using detergent

•

Fill the detergent tank (10) with a suitable

cleaning agent.

•

The detergent will be added automatically in

low-pressure mode.

•

Detergent may be used only together with the

following accessories.

6.2.1 Using detergent with the solid cone /

ﬂ at fan lance

Set the solid cone / ﬂ at fan lance (Fig. 10) to low-

pressure mode (n).

6.3 Holder for the gun/accessories (Fig. 7)

To save space when not in use, the gun and ac-

cessories can be kept in the holder provided.

Caution! Before using the pressure cleaner,

make sure that the high-pressure hose is comple-

tely unwound.

7. Replacing the power cable

If the power cable for this equipment is damaged,

it must be replaced by the manufacturer or its

after-sales service or similarly trained personnel

to avoid danger.

8. Cleaning and maintenance

Always pull out the mains power plug before star-

ting any cleaning work.

8.1 Cleaning

•

Keep all safety devices, air vents and the

motor housing free of dirt and dust as far as

possible. Wipe the equipment with a clean

cloth or blow it with compressed air at low

pressure.

•

We recommend that you clean the device

immediately each time you have finished

using it.

•

Clean the equipment regularly with a moist

cloth and some soft soap. Do not use

cleaning agents or solvents; these could

attack the plastic parts of the equipment. En-

sure that no water can seep into the device.

8.2 Maintenance

8.2.1 Testing the water intake ﬁ lter

Periodically check the intake ﬁ lter in order to pre-

vent clogging, which could jeopardize operation

of the pump.

To do this, unscrew the coupling for the water inlet

hose from the device and clean the exposed inlet

sieve under running water.

Anl_SA_TC_HP_1435_SPK8.indb 28Anl_SA_TC_HP_1435_SPK8.indb 28 17.10.2017 08:05:2617.10.2017 08:05:26

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Einhell TC-HP 1435 in the language / languages: English, Spanish as an attachment in your email.

The manual is 0,39 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Einhell TC-HP 1435 Manual

Product: