Manual Einhell TC-HP 1334 (page 18 of 156) (All languages)

606016

Zoom out

Zoom in

1/156

- 18 -

•

So that the pump does not suffer any damage

when it is not in use, a small amount of leaka-

ge from the pump is normal.

•

Never use the machine in potentially explosi-

ve areas under any circumstances!

•

The operating temperature must be between

+5 and + 40°C.

•

Do not cover or modify the lance or the spray

nozzles in any way.

•

The pressure cleaner is designed to be used

with cold or lukewarm water (max. 40 °C); hig-

her temperatures can damage the pump.

•

Do not use water that is dirty, gritty or con-

tains any chemical products, as these could

impair operation and shorten the life of the

equipment.

Caution: Risk of explosion

Do not spray ﬂ ammable liquids.

Warning

Water that has passed through the non-return

valve is not drinkable.

Warning

If cleaning agent gets into contact with your skin

or into your eye, rinse immediately with lots of

clean water. Then consult a doctor or follow the

steps described on the safety data sheet or provi-

ded by the manufacturer of the cleaning agent.

5.2 Assembly

5.2.1 Assembling the equipment (Fig. 1)

Push the accessories holder (2) onto the high-

pressure cleaner (5). The holder can be used for

space-saving storage of the gun (8), the extensi-

on (9) and the high-pressure hose (14).

Note! Before using the pressure cleaner, make

sure that the high-pressure hose is completely

unwound.

5.2.2 Fitting the attachments (Fig. 2)

Before you use the high-pressure cleaner (5) you

must ﬁ rst fasten the extension (9) to the gun (8)

by pushing and twisting.

Then push the rotating nozzle (13) or the cleaning

agent container (10) onto the extension (9) by

means of the quick connection system.

Rotating nozzle

To remove particularly stubborn dirt, use the rota-

ting nozzle (13).

Cleaning agent container

You can adjust the quantity of cleaning agent you

want to add by turning (+ / -) on the setting wheel

(11). We recommend using the cleaning agent

sparingly.

5.2.3 Connecting the high-pressure hose

(Fig. 3/4)

Connect the high-pressure hose (14) to the gun

(8) and the high-pressure cleaner (5).

Note:

The connections for the high-pressure hose

and the accessories are equipped with a quick

connection system (12). To connect, simply push

the hose or the accessory onto the respective

connection. To remove, simply actuate the quick

connection system (12) and you can remove the

hose or the accessory.

Each time before ﬁ tting, always check that the

quick connection system (12) is correctly enga-

ged. Do this by pulling brieﬂ y on the hose or the

accessory.

5.2.4 Water inlet connector (Fig. 1/4)

The connection for the water inlet (4) is equipped

with a connector for standard hose coupling sys-

tems. Plug the hose coupling on the supply hose

(min. Ø 1/2“/13 mm) to the water inlet connector

(4).

Always use a reinforced hose with a standard

coupling for the water inlet. The hose should be at

least 6 m in length. (Not supplied)

A backﬂ ow preventer must be installed between

the drinking water and the pressure cleaner! Ask

your local plumber about this.

5.2.5 Electrical connections (Fig. 1)

•

Before you connect the equipment to the

power supply make sure that the data on the

rating plate are identical to the supply voltage.

•

If you use any extension cables, make sure

that they are suitable for outdoor use and

have large enough wires:

1 – 10 m: 1.5 mm²

10-30m: 2.5 mm²

•

Insert the power plug on the power cable into

the socket outlet.

Anl_TC_HP_1334_SPK7.indb 18Anl_TC_HP_1334_SPK7.indb 18 26.02.16 08:3426.02.16 08:34

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Einhell TC-HP 1334 in the language / languages: All languages as an attachment in your email.

The manual is 1,65 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Einhell TC-HP 1334

Einhell TC-HP 1334 User Manual - English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish - 60 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Einhell TC-HP 1334 Manual

Product: