606705
16
Zoom out
Zoom in
Previous page
1/88
Next page
GB
- 16 -
4. Technical data
Voltage: ......................................... 230 V ~ 50 Hz
Power rating: ........................................ 860 watts
Idling speed: ...................................... 11,000 rpm
Cutter dimensions: .............ø 100 x ø 22 x 3,8 mm
Cutting depth: ...................................max. 14 mm
Angle settings: .......................................... 0°-90°
Protection class: ............................................ II/
Weight: .......................................................3.0 kg
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L
pA
sound pressure level ........................ 88 dB(A)
K
pA
uncertainty ............................................. 3 dB
L
WA
sound power level .......................... 99 dB(A)
K
WA
uncertainty .............................................3 dB
Wear ear-mu s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 60745.
Handle
Vibration emission value a
h
= 5.252 m/s
2
K uncertainty = 1.5 m/s
2
Additional handle
Vibration emission value a
h
2.5 m/s
2
K uncertainty = 1.5 m/s
2
The speci ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the speci ed value
in exceptional circumstances.
The speci ed vibration value can be used to
compare the equipment with other electric power
tools.
The speci ed vibration value can be used for initi-
al assessment of a harmful e ect.
Keep the noise emissions and vibrations to a
minimum.
Only use appliances which are in perfect wor-
king order.
Service and clean the appliance regularly.
Adapt your working style to suit the appliance.
Do not overload the appliance.
Have the appliance serviced whenever ne-
cessary.
Switch the appliance off when it is not in use.
Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment’s construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
5. Before starting the equipment
Before you connect the equipment to the mains
supply make sure that the data on the rating plate
are identical to the mains data.
Warning!
Always pull the power plug before making
adjustments to the equipment.
5.1 Fitting the dust extractor adapter (Fig. 2)
The adapter for the dust extraction system (5) and
the dust bag (6) must be tted (Fig. 2).
5.2 Setting the cutting depth (Fig. 3)
Set the required cutting depth with the setting
wheel (3).
The designations on the setting wheel reflect
the various sizes of biscuit dowels
Push the drive motor (11) forwards to check
the cutting depth. The plug must be discon-
nected from the mains supply for this purpo-
se.
You can adjust the cutting depth setting using
the screw (a).
Anl_TC_BJ_900_SPK1.indb 16Anl_TC_BJ_900_SPK1.indb 16 19.01.15 13:0319.01.15 13:03
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Einhell TC-BJ 900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Einhell TC-BJ 900 in the language / languages: English, Danish, Swedish, Norwegian as an attachment in your email.

The manual is 1,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Einhell TC-BJ 900

Einhell TC-BJ 900 User Manual - German, Dutch, French, Italian, Portuguese, Spanish - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info