724236

Einhell SKA 3503 EQ C-H Manual

15
Zoom out
Zoom in
Previous page
1/28
Next page
GB
15
LOW – MED – HIGH – AUTO.
9. ON/OFF: Pressing this button enables you to
switch on the device. Pressing it a second time
will switch off the device.
10. TIMER ON: Pressing this button enables you to
set the time at which the device will switch on
(0.5 – 24 hours). Each time you press this button
the activation time will move in steps of 30
minutes (steps of one hour after 10 hours). Set
0:00 to deactivate this mode.
11. SLEEP: Pressing this button enables you to
select economy mode. Pressing it a second time
will deactivate this mode. The mode will also be
deactivated as soon as you press another
button. This function can only be used in COOL,
HEAT and AUTO modes.
12. TIMER OFF: Pressing this button enables you to
set the time at which the device will switch off
(0.5 – 24 hours). Each time you press this button
the deactivation time will move in steps of 30
minutes (steps of one hour after 10 hours). Set
0:00 to deactivate this mode.
13. LOCK: Pressing this button locks all current
settings and the remote control will not allow you
to change any more settings. Pressing it a
second time will cancel LOCK mode.
14. TURBO: Not assigned.
Display
21. DIGITAL DISPLAY AREA: The set temperature
will normally be displayed here. If the “Timer On”
or “Timer Off” buttons are pressed, the TIMER
settings will be displayed. Nothing will be
displayed in FAN mode.
22. TRANSFER SIGNAL: This arrow will be lit as
soon as the remote control transfers signals to
the indoor device. The indoor device will then
confirm with a signal tone.
23. ON/OFF: This symbol will go out as soon as the
device has been switched on using the remote
control. It will go out as soon as the device has
been switched off.
24. MODES: As soon as you press the MODE
button, an arrow will appear in front of the mode
that is currently active.
25. LOCK: The LOCK display will be displayed after
you have pressed the LOCK button. If the LOCK
button is pressed a second time the display will
go out.
26. TIMER DISPLAY: As soon as an activation time
has been selected, TIMER ON will appear in this
area. If a deactivation time has been selected,
TIMER OFF will be displayed. If both functions
have been selected, TIMER
ON OFF will be
displayed.
27. FAN SPEED DISPLAY: If you have pressed the
FAN SPEED button, an arrow will appear here
before the currently selected fan speed
(exception: if AUTO speed has been selected, no
arrow will be displayed).
Operating modes
A) AUTO (Automatic) mode
1. Press the MODE button to select AUTO mode.
2. Pressing the TEMP buttons enables you to
select the required room temperature. The most
comfortable temperature settings are between
21°C and 28°C.
3. Pressing the ON/OFF button enables you to
switch on the air conditioner. OPERATION and
AUTO will be lit on the display of the indoor
device. In addition the temperature set on the
remote control will be displayed. The fan speed
will be set automatically.
4. Pressing the ON/OFF button a second time
enables you to switch off the air conditioner.
NOTE
In AUTO mode the air conditioner will automatically
select on the COOL, FAN and HEAT modes by
detecting the temperature difference between the
actual room temperature and set temperature.
B) COOL, HEAT and FAN modes
1. You can select the required COOL, HEAT or
FAN mode by pressing the MODE button.
2. Pressing the TEMP buttons enables you to
select the required room temperature.
3. Pressing the FAN SPEED button enables you to
select the fan speed. Each time you press the
button, the speeds will be selected in the
following sequence: AUTO – LOW – MED –
HIGH.
4. Pressing the ON/OFF button enables you to
switch on the air conditioner. OPERATION will
be lit on the display of the indoor device. In
addition the temperature set on the remote
control will be displayed.
5. Pressing the ON/OFF button a second time
enables you to switch off the air conditioner.
NOTE
FAN mode cannot be used to control the
temperature. Only settings 1, 3, 4 and 5 can be
made in this mode.
C) DRY (dehumidifier) mode
1. Press the MODE button to select DRY mode.
2. Pressing the TEMP buttons enables you to
select the required room temperature. The
device will alternately activate the fan function
and the cooling function.
Anleitung_SKA_2503_E+Q_C_H_GB:_ 10.12.2008 11:28 Uhr Seite 15
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Einhell SKA 3503 EQ C-H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Einhell SKA 3503 EQ C-H in the language / languages: English as an attachment in your email.

The manual is 5,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Einhell SKA 3503 EQ C-H

Einhell SKA 3503 EQ C-H User Manual - German - 32 pages

Einhell SKA 3503 EQ C-H User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info