10
1
2
F) Timer settings (for automatically switching the device
on/off)
1. “T-ON” (device ON timer) key
This key is pressed to automatically switch on the unit. The only
requirement is that the unit be connected to a power supply.
Each time the key is pressed, the time setting changes by an
increment of 0.5 hours within a 0.5 and 24 hour range. To
switch the “Device ON timer” back off, press the key again after
“24h” is displayed or switch off the device by pressing the
“ON/OFF” key.
2. “T-OFF” (device OFF timer) key
This key is pressed to automatically switch off the unit. The only
requirement is that the unit be in operation. Each time the key is
pressed, the time setting changes by an increment of 0.5 hours
within a 0.5 and 24 hour range. To switch the “Device OFF
timer” back off, press the key again after “24h” is displayed or
switch off the device by pressing the “ON/OFF” key.
7. Indoor device settings
The left-hand and right-hand side flow directions can be adjusted manually.
Perform these adjustments before you start the device because once it has been started the slats vibrate and
there is a risk of your fingers getting caught.
Remote control fails to work (emergency operation)
If the remote control fails to work (empty batteries or
malfunction), use the emergency switch (A).
- The device is off: After the emergency stop switch has been
pressed the device switches to automatic mode. The slat
adjuster also operates in automatic mode.
- The device is on: The device switches off if the emergency
switch is pressed.
A
