605855
19
Zoom out
Zoom in
Previous page
1/104
Next page
GB
- 19 -
5.2 Assembling the axle and wheels
(Figs. 4a-4h)
Remove the sleeves, nuts and washers from
the axle
Mount the chassis as shown in Figs. 4a-4h.
5.3 Fitting the holder for the prodder (Fig. 8)
Press the holder for the prodder onto the chassis
as shown in Fig. 8.
5.4 Fitting the shredder debris bag (Fig. 9)
As an option you can t the supplied shredder
debris bag to the equipment. To do so, hang the
shredder debris bag (Fig. 9 / Item 22) on the
hooks provided for the purpose (Fig. 9 / Item 23).
6. Operation
Please observe the statutory regulations gover-
ning noise abatement during operating times,
which may di er from town to town.
6.1 Connecting up the machine and swit-
ching it on
Connect the coupling on the machine con-
nection cable (extension) to the power cable
(Fig. 1/Item 9).
The machine can be switched ON (switch po-
sition “I”) and OFF (switch position “0”) using
the ON/OFF switch (Figure 1/Item 11).
Note: The machine cannot be switched on if the-
re is no voltage being supplied to it. If the power
supply is interrupted, the machine will switch o
automatically (switch position “0”). The machine
cannot be switched on again until the voltage
supply has been re-established and the ON/OFF
switch has been moved to position “I”.
6.2 Overload protection
(motor circuit-breaker)
The motor is protected from overloads by an
overload switch.
In case of overloading the equipment will shut
down automatically. To restart, set the On/Off
switch to the position „I“.
If the motor fails to start, clean the ejector
chute.
6.3 Practical tips
Be sure to observe the safety instructions
(see supplied booklet).
Wear work gloves, goggles and ear protec-
tion.
The material is drawn into the shredder auto-
matically. CAUTION! Long pieces of material
projecting out of the funnel inlet may whiplash
when it is drawn in – keep a safe distance
between yourself and the machine.
Judge the quantity of material which you put
into the funnel inlet so that the funnel does
not clog.
If you want to shred withered, damp material
that has been lying in the garden for several
days, alternate between putting in this materi-
al and branches. This will help to prevent the
loading funnel becoming clogged with materi-
al.
Do not shred soft waste (e.g. kitchen waste) –
put it straight in the compost box.
Entangled branches and leaves should be tho
roughly shredded before loading any more
material.
Do not allow the discharge opening to be-
come clogged with shredded material – risk
of pile-ups.
Do not cover the ventilation slits.
Do not place heavy material or thick bran-
ches into the machine continuously. This may
cause the blade to jam.
Use the prodder (Fig. 1/Item 4) to remove
jammed objects from the funnel inlet, use
a hook to remove jammed objects from the
ejector opening.
Swing open the loading funnel (Fig. 5/Item
2) by opening the release screw (Fig. 5/ Item
12). You can now remove blockages from the
inside of the equipment.
Important! Wear work gloves! Risk of injury
from the cutters.
Anl_GH_KS_2440_SPK7.indb 19Anl_GH_KS_2440_SPK7.indb 19 25.06.14 14:1925.06.14 14:19
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Einhell GH-KS 2440 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Einhell GH-KS 2440 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Finnish as an attachment in your email.

The manual is 2,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info