21
GB
n Filling bottle
n Spark plug wrench
n Open-ended spanner 8/10 mm
n Allen key size 4 mm
n Allen key size 5 mm
n Guard hood for cutting line/cutting blade
n Cable tie (2x)
n Screwdriver
n Support plate
n Screw (2x)
n Original operating instructions
n Safety information
4. Intended use
The equipment is designed for cutting lawns and
grassed areas. The operating instructions as supplied
by the manufacturer must be kept and referred to in
order to ensure that the equipment is properly used
and maintained. Any use which is not expressly
permitted in the manual may result in damage to the
equipment and place the user in serious danger. Be
sure to observe the restrictions in the safety
instructions.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or industrial
businesses or for equivalent purposes.
Important. Due to the high risk of bodily injury to the
user, the petrol power scythe must not be used to
carry out the following work: to clean dirt and debris
off walkways, or to chop up tree or hedge clippings.
Moreover, the petrol power scythe may not be used to
level out high areas such as molehills. For safety
reasons, the petrol power scythe may not be used as
a drive unit for other work tools or toolkits of any kind.
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user/operator and not the manufacturer
will be liable for any damage or injuries of any kind
caused as a result of this.
5. Technical data
Engine type
4-stroke engine, air-cooled, chrome cylinder
Engine power (max.) 1 kW (1.36 HP)
Displacement 33.5 ccm
Idle speed of engine 2,800 min
-1
Max. torque engine
Scythe: 8,500 min
-1
Trimmer: 7,500 min
-1
Ignition Electronic
Drive Centrifugal clutch
Weight (with empty tank) 4 kg
Cutting line diameter 46 cm
Cutting circle diameter of blade 25,5 cm
Cutting line length 8 m
Cutting line diameter: 2.5 mm
Tank capacity 0.65 l
Spark plug Torch CMR6A (Champion RY4C)
Sound and vibration
Sound pressure level L
pA
96 dB(A)
Uncertainty K
pA
3 dB
Sound power level L
WA
107 dB(A)
Uncertainty K
WA
3 dB
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Functions
Vibration emission value a
h
= 5 m/s
2
K uncertainty = 1.5 m/s
2
Reduce noise generation and vibration to a
minimum!
n Use only equipment that is in perfect condition.
n Maintain and clean the equipment regularly.
n Adopt your way of working to the equipment.
n Do not overload the equipment.
n Have the equipment checked if necessary.
n Switch off the equipment when not in use.
n Wear gloves.
