Manual Einhell GE-EM 1843 HW M (page 21 of 108) (English, German, Dutch, French, Italian, Swedish)

605700

Zoom out

Zoom in

1/108

- 25 -

Warning!

This equipment generates an electromagnetic

ﬁ eld during operation. Under certain circumstan-

ces this ﬁ eld may actively or passively impede

medical implants. To reduce the risk of serious

or fatal injuries, we recommend persons with

medical implants to consult their doctor and the

manufacturer of the medical implant prior to using

the equipment.

5. Before starting the equipment

Before you connect the equipment to the mains

supply make sure that the data on the rating plate

are identical to the mains data.

Always pull the power plug before making

adjustments to the equipment.

The lawn mower is delivered unassembled. The

complete push bar and the grass basket must be

assembled before using the lawn mower. Follow

the operating instructions step-by-step and use

the pictures provided as a visual guide to easily

assemble the equipment.

Mounting the push bar (Fig. 3 to 7)

Take a push bar bracket (Fig. 2 Item 2) and fasten

it as shown in Fig. 3. Important. Before you fasten

the top push bar, do not forget to ﬁ t the holder for

the cable strain-relief clip (Fig. 2/Item 12) and the

strain-relief clip (Fig. 2/Item 8) on the top push bar

ﬁ rst (see Fig. 5).

The top push bar (Fig. 1/Item 1) must be pushed

onto the push bar brackets (Fig. 2/Item 2) and

secured as shown above in Fig. 6. Then attach

the power cable to the push bar (Fig. 7/Item 14)

using the cable clips (Fig. 2/Item 14). Now you

can select the push bar height in three 3 from 80

to 103.5 cm (Fig. 4/Item A).

Important.

The handle height may be adjusted only within

the marked range.

•

Press in the long handle and secure in the

desired position using the quick clamping

function (Fig. 4/Item B)

Important.

Always set the identical handle height on both

sides.

•

Arrange the cable with the cable clips on the

long handle (Fig. 7/Item 14)

Mounting the grass basket

(see Figs. 8a to 8c)

First plug the lower part of the housing (Fig. 2/

Item 15) and the right part of the housing (Fig. 2/

Item 16) together as shown in Fig. 8a. Then plug

the top part of the housing (Fig. 2/Item 17) onto

the previously assembled parts (Fig. 8b). Before

you ﬁ t the grass basket you must ensure that the

motor is switched oﬀ and the blade is not rotating.

Lift the ejector ﬂ ap (Fig. 8c/Item 4) with one hand.

With the other hand, hold the grass basket by the

handle and hook it in from above (Fig. 8c).

Filling level indicator of the grass collector

The grass collector is equipped with a ﬁ lling level

indicator (Fig. 2/Item 18) which is opened by the

air current that the lawn mower generates during

operation. If the ﬂ ap closes during mowing, the

grass collecting device is full and must be emp-

tied. To ensure the proper functioning of the ﬁ lling

level indicator, the holes under the ﬂ ap must be

kept clean and open.

Using the mulching adapter (Fig. 9, not inclu-

ded with 34.001.81):

In mulching mode the cuttings are shredded in

the enclosed mower housing and then spread

back onto the lawn. It is not necessary to gather

and dispose of the grass.

Important: Mulching is only possible if the lawn is

relatively short.

Important!

Insert the mulching blade only when the engine is

switched oﬀ and the power plug has been pulled

out.

To use the mulching function, disconnect the

grass box, slide the mulching adaptor (Fig. 9/Item

22) into the ejector opening and close the ejector

ﬂ ap.

Anl_GE_EM_1843_HW_M_SPK7.indb 25Anl_GE_EM_1843_HW_M_SPK7.indb 25 01.08.13 11:3401.08.13 11:34

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Einhell GE-EM 1843 HW M in the language / languages: English, German, Dutch, French, Italian, Swedish as an attachment in your email.

The manual is 1,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Einhell GE-EM 1843 HW M Manual

Product: