Manual Einhell GE-DP 7330 LL ECO (page 21 of 172) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

605858

Zoom out

Zoom in

1/172

- 21 -

Manual operation:

Mount the ﬂ oating switch as illustrated in Fig. 1.

The equipment will then run continuously. To pre-

vent dry running, this operating mode is allowed

only under supervision. The equipment must be

switched oﬀ (pull out the power plug) as soon as

no more water is emitted from the discharge line.

Dirty water mode (Fig. 4/5):

•

Turn the equipment counter-clockwise up as

far as the stop (Fig. 4/5).

Shallow suction mode (Fig. 5):

•

Turn the equipment clockwise down as far as

the stop (Fig. 5).

•

In shallow suction mode, water can be su-

cked up down to a level of 1 mm.

•

Only clean water can be sucked up in shallow

suction mode.

Please note:

For the equipment to suck up water in shallow

suction mode there must be a minimum depth of

10 mm of water.

7. Replacing the power cable

Danger!

If the power cable for this equip-

ment is damaged, it must be

replaced by the manufacturer or

its after-sales service or similarly

trained personnel to avoid dan-

ger.

8. Cleaning, maintenance and

ordering of spare parts

Danger!

Always pull out the mains power plug before star-

ting any cleaning work.

8.1 Cleaning

•

Keep all safety devices, air vents and the

motor housing free of dirt and dust as far as

possible. Wipe the equipment with a clean

cloth or blow it with compressed air at low

pressure.

•

We recommend that you clean the device

immediately each time you have finished

using it.

•

Clean the equipment regularly with a moist

cloth and some soft soap. Do not use

cleaning agents or solvents; these could at-

tack the plastic parts of the equipment. Ensu-

re that no water can seep into the device. The

ingress of water into an electric tool increases

the risk of an electric shock.

8.2 Cleaning the intake cage and pump

housing (Fig. 5/6/7/8):

1. Screw out the three screws (Fig. 6/Item B)

counter-clockwise.

2. Turn the equipment up as far as the stop (Fig.

5). Note the position of the lug (Fig. 5/Item A)

and remove the intake cage (Fig.7/Item 4).

3. Clean the intake cage (Fig. 7/Item 4) and the

pump impeller housing (Fig.7/Item C) with

clean water.

4. Assemble in reverse order.

5. When assembled, the lug must be in the cor-

rect position (Fig. 8/Item A).

8.3 Maintenance

There are no parts inside the equipment which

require additional maintenance.

8.4 Ordering replacement parts:

Please quote the following data when ordering

replacement parts:

•

Type of machine

•

Article number of the machine

•

Identification number of the machine

•

Replacement part number of the part required

For our latest prices and information please go to

www.isc-gmbh.info

Anl_GE_DP_7330LL_5220LL_SPK7.indb 21Anl_GE_DP_7330LL_5220LL_SPK7.indb 21 15.10.14 10:0715.10.14 10:07

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Einhell GE-DP 7330 LL ECO in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Einhell GE-DP 7330 LL ECO Manual

Product: