Manual Einhell GE-CM 43 Li M (page 24 of 128) (English, Danish, Swedish, Norwegian, Finnish)

724269

Zoom out

Zoom in

1/128

- 24 -

residual risks cannot be eliminated. The fol-

lowing hazards may arise in connection with

the equipment‘s construction and layout:

1. Lung damage if no suitable protective dust

mask is used.

2. Damage to hearing if no suitable ear protec-

tion is applied.

Warning!

This equipment generates an electromag-

netic ﬁ eld during operation. Under certain

circumstances this ﬁ eld may actively or pas-

sively impede medical implants. To reduce

the risk of serious or fatal injuries, we recom-

mend persons with medical implants to con-

sult their doctor and the manufacturer of the

medical implant prior to using the equipment.

5. Before starting the equipment

The lawn mower is delivered partly assembled.

The push bar and the grass basket must be as-

sembled before using the lawn mower. Follow the

instructions step by step and refer to the pictures

when assembling.

Mounting the push bar (Fig. 3 to 7).

Insert the push bar holder (Fig. 2/Item 3) into

the handlebar mount and secure with the quick

clamping function (Fig. 2/Item 11) (Fig. 3). The

top push bar (Fig. 1/Item 2) must be pushed onto

the push bar holders (Fig. 2/Item 3) and secured

as shown above in Fig. 4. Then attach the power

cable to the push bar (Fig. 5/Item 13) using the

cable clips (Fig. 2/Item 13). Now you can select

the push bar height in three stages (Fig. 6/Item A).

Note!

The handle height may be adjusted only within

the marked range.

•

Press in the long handle and secure in the

desired position using the quick clamping

function (Fig. 6/Item 11)

Warning!

Always set the identical handle height on both

sides.

•

Use the cable clips to align the cable to the

long handle (Fig. 5/Item 13)

Fitting the grass box (see Figs. 7 to 9)

First plug the lower part of the housing (Fig. 2/

Item 15) and the right part of the housing (Fig. 2/

Item 18) together as shown in Fig. 7. Then plug

the top part of the housing (Fig. 2/Item 17) onto

the previously assembled parts (Fig. 8).Before

you ﬁ t the grass basket you must ensure that the

motor is switched oﬀ and the blade is not rotating.

Lift the ejector ﬂ ap (Fig. 9/Item 7) with one hand.

With the other hand, hold the grass basket by the

handle and hook it in from above (Fig. 9).

Filling level indicator of the grass collector

The grass box is equipped with a ﬁ lling level in-

dicator (Fig. 2/Item 16). which is opened by the

airﬂ ow that the lawn mower generates during ope-

ration. If the ﬂ ap closes during mowing, the grass

collecting device is full and must be emptied. To

ensure the proper functioning of the ﬁ lling level

indicator, the holes under the ﬂ ap must always be

kept clean and passable.

Adjusting the cutting height

Caution!

Adjust the cutting height only when the machine

has been switched oﬀ and the safety plug has

been pulled out.

Before you begin to mow, check to ensure that the

blade is not blunt and that none of the fasteners

are damaged. To prevent any imbalance, replace

blunt and/or damaged blades. To carry out this

check, ﬁ rst switch oﬀ the motor and pull out the

safety plug.

The cutting height is adjusted as follows (see Fig.

11):

1. Push the lever (A) outwards.

2. Set the lever (B) to the desired cutting height.

3. Release the lever (A) and check that it is se-

curely seated in the lock.

Reading oﬀ the cutting height

The cutting height can be set between 25-75 mm

in 6 intervals, and can be read oﬀ on the scale

(Fig. 11/C).

Anl_GE_CM_43_Li_M_SPK9.indb 24Anl_GE_CM_43_Li_M_SPK9.indb 24 23.03.2018 11:52:5423.03.2018 11:52:54

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Einhell GE-CM 43 Li M in the language / languages: English, Danish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 2,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Einhell GE-CM 43 Li M

Einhell GE-CM 43 Li M User Manual - German, Dutch, French, Italian, Portuguese, Spanish - 88 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Einhell GE-CM 43 Li M Manual

Product: