Manual Einhell GE-CM 36 Li M (page 24 of 126) (English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian)

605693

Zoom out

Zoom in

1/126

- 24 -

5. Before starting the equipment

The lawn mower is delivered unassembled. The

complete push bar, the rear wheels and the grass

basket must be assembled before using the lawn

mower. Follow the operating instructions step-

by-step and use the pictures provided as a visual

guide to easily assemble the equipment.

Fitting the wheels (Figures 3a, b and 4)

Take the rear wheels (Figure 2/Item11) and mount

them on the axle as shown in Figure 3a. Then

slide the washer (Figure 2/Item 23) onto the axle

and fasten all parts with the supplied split pin

(Figure 2/Item 22) as shown in Figure 3b. Finally,

press the wheel caps (Figure 2/Item 10) onto the

wheels (Figure 4).

Mounting the push bar (Fig. 5 to 10)

First take the spring (Figure 2/Item 16) and the

handlebar mount (Figure 2/Item 12) and mount

them on the relevant axle (Figure 5). Now insert

the push bar holder (Figure 2/Item 3) into the

handlebar mount (Figure 2/Item 12) and secure

with the quick clamping function (Figure 2/Item

17) (Figure 6).

The top push bar (Figure 1/Item 2) must be pu-

shed onto the push bar holders (Figure 2/Item 3)

and secured as shown above in Figure 9. Then

attach the power cable to the push bar (Fig. 10/

Item A) using the cable clips (Fig. 2/Item 18). Now

you can select the push bar height in three steps

from 93.5 to 115.5 cm (Figure 7/Item A).

Notice!

The handle height may only be adjusted within

the marked range.

•

Press in the long handle and secure in the

desired position using the quick clamping

function (Figure 7/Item B)

Warning!

Always set the identical handle height on both

sides.

•

Use the cable clips to align the cable in ac-

cordance with the long handle (Figure 10/

Item A)

Mounting the grass basket

(see Figs. 11 to 13)

First, plug the left (Fig. 2/Item 21) and right (Fig. 2/

Item 20) part of the housing together as shown in

Figure 11. Then plug the top part of the housing

(Fig. 2/Item 19) onto the already mounted parts

(Figure 12). Before you ﬁ t the grass basket you

must ensure that the motor is switched oﬀ and the

blade is not rotating. Lift the ejector ﬂ ap (Fig. 13 /

Item A) with one hand. With the other hand, hold

the grass basket by the handle and hook it in from

above (Fig. 13).

Filling level indicator of the grass collector

The grass collector is equipped with a ﬁ lling level

indicator (Fig. 2/Item 24) which is opened by the

air current that the lawn mower generates during

operation. If the ﬂ ap closes during mowing, the

grass collecting device is full and must be emp-

tied. To ensure the proper functioning of the ﬁ lling

level indicator, the holes under the ﬂ ap must be

kept clean and open.

Adjusting the cutting height

Warning!

Adjust the cutting height only when the engine is

switched oﬀ and the power cable has been dis-

connected.

Before you begin to mow, check to ensure that the

blade is not blunt and that none of the fasteners

are damaged. To prevent any imbalance, replace

blunt and/or damaged blades. To carry out this

check, ﬁ rst switch oﬀ the motor and pull out the

power plug.

The cutting height is adjusted as follows

(see Fig. 14):

1. Push the lever (A) outwards.

2. Set the lever (B) to the desired cutting height.

3. Release the lever (A) and check that it is se-

curely seated in the lock.

Reading oﬀ the cutting height

The cutting height can be set between 25-75 mm

in 6 intervals, and can be read oﬀ on the scale

(Fig. 14/C).

Using the mulching adapter (Fig. 15, not in-

cluded with 34.130.60):

In mulching mode the cuttings are shredded in

the enclosed mower housing and then spread

back onto the lawn. It is not necessary to gather

and dispose of the grass.

Anl_GE_CM_36_Li_SPK7.indb 24Anl_GE_CM_36_Li_SPK7.indb 24 20.10.14 11:5320.10.14 11:53

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Einhell GE-CM 36 Li M in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian as an attachment in your email.

The manual is 3,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Einhell GE-CM 36 Li M Manual

Product: