Manual Einhell GE-CM 18 Li - Set (page 115 of 130) (English, German, Dutch, French, Italian, Swedish)

724331

115

Zoom out

Zoom in

1/130

- 115 -

Residual risks

Even if you use this electric power tool in

accordance with the instructions, certain

residual risks cannot be eliminated. The fol-

lowing hazards may arise in connection with

the equipment‘s construction and layout:

1. Lung damage if no suitable protective dust

mask is used.

2. Damage to hearing if no suitable ear protec-

tion is applied.

Warning!

This equipment generates an electromag-

netic ﬁ eld during operation. Under certain

circumstances this ﬁ eld may actively or pas-

sively impede medical implants. To reduce

the risk of serious or fatal injuries, we recom-

mend persons with medical implants to con-

sult their doctor and the manufacturer of the

medical implant prior to using the equipment.

5. Before starting the equipment

The lawn mower is delivered partly assembled.

The push bar and the grass basket must be

assembled before using the lawn mower. Follow

the instructions step by step and refer to the

pictures when assembling.

Warning! Always pull out the safety plug be-

fore making adjustments to the equipment.

Fitting the push bar (Fig. 3a to 3c)

Take a bottom push bar (Fig. 2 /Item 3) and fasten

it with the nut (Fig. 2/Item 13) as shown in Fig. 3a.

Proceed in the same way on the other side. Screw

the top push bar (Fig. 2/Item 2) to the bottom

push bar (Fig. 2/Item 3) as shown in Fig. 3b.

Then attach the power cable to the push bar (Fig.

2/Item 14) using the cable clips (Fig. 3c).

Mounting the grass basket (Fig. 4a to 4c)

Plug the bottom and the top part of the grass box

together (Fig. 4a/Item 9, 10). Ensure that all the

plastic lugs engage correctly. Next push the grass

box handle (Fig. 4b/Item 11) into the openings on

the grass box. Check that the handle is secure

and correctly positioned. Before you ﬁ t the grass

basket you must ensure that the motor is swit-

ched oﬀ and the blade is not rotating.

The grass box must be attached to the two hooks

on the mower. To do this, open the ejector ﬂ ap

with one hand (Fig. 4c/Item 7) and attach the

grass box with the other hand. The ejector ﬂ ap is

held against the grass box by a spring.

Adjusting the cutting height

Warning!

Adjust the cutting height only when the motor has

been switched oﬀ and the safety plug has been

disconnected.

Before you begin to mow, check to ensure that the

blade is not blunt and that none of the fasteners

are damaged. To prevent any imbalance, replace

blunt and/or damaged blades. To carry out this

check, ﬁ rst switch oﬀ the motor and pull out the

safety plug.

The cutting height is adjusted as shown in Figure

5. To do so, turn the equipment upside down or tilt

it to the side. Position both the front and rear axle

in the same notch, so that the cutting blade runs

parallel to the lawn.

Position Cutting depth

1 70mm

2 50mm

3 30mm

Charging the battery (Fig. 6)

1. Take the battery pack out of the equipment.

Do this by pressing the side pushlock buttons.

2. Check that your mains voltage is the same as

that marked on the rating plate of the battery

charger. Insert the power plug of the charger

(17) into the socket outlet. The green LED will

then begin to ﬂ ash.

3. Insert the battery pack (16) into the battery

charger (17).

4. In the section entitled „Charger indicator“ you

will ﬁ nd a table with an explanation of the LED

indicator on the charger.

The battery pack can become a little warm during

the charging. This is normal.

If the battery pack fails to charge, check:

•

whether there is voltage at the socket outlet

•

whether there is good contact at the charging

contacts

If the battery pack still fails to charge, send

•

the charging unit

•

and the battery pack

to our customer service center.

Anl_GE_CM_18_Li_Set_SPK7.indb 115Anl_GE_CM_18_Li_Set_SPK7.indb 115 19.09.2018 08:45:2419.09.2018 08:45:24

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Einhell GE-CM 18 Li - Set in the language / languages: English, German, Dutch, French, Italian, Swedish as an attachment in your email.

The manual is 2,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Einhell GE-CM 18 Li - Set Manual

Product: