Manual Einhell GE-CM 18-30 Li (page 27 of 218) (English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish)

724332

Zoom out

Zoom in

1/218

- 27 -

•

For best results, clean the lawn mower with a

brush or rag.

7.2 Maintenance

•

Worn out or damaged blades, blade mounts,

and bolts should be replaced as a set by an

authorized professional in order to keep the

equipment in balance.

•

Ensure that all mounting components (i.e.

screws, bolts, nuts etc.) are always tightened

so that the equipment can be safely operated

at all times.

•

Frequently check the grass catch assembly

for signs of wear.

•

Replace excessively worn or damaged parts

immediately.

•

In order to ensure that you enjoy the equip-

ment for many years to come, all screwed

parts, as well as the wheels and axles, should

be cleaned and lubricated.

•

Keeping your lawn mower in good condition

not only ensures a long lifespan and high per-

formance, but also enables the equipment to

thoroughly cut your grass with minimal effort.

•

The blade is subjected to more wear and

tear than any other component. Therefore,

routinely check the condition of the blade

and make sure that it is tightly fastened. If the

blade is completely worn out, it must be im-

mediately replaced or ground sharp again. An

excessively vibrating mower means that the

blade is not properly balanced or has become

deformed from striking an object. In this case,

the blade must be repaired or replaced.

•

There are no parts inside the equipment

which require additional maintenance.

7.3 Replacing the blade

For safety reasons, we recommend having the

blade replaced by an authorized professional. Im-

portant! Wear work gloves! Only replace the blade

with a genuine Einhell replacement blade, as this

will ensure top performance and safety under all

conditions.

Carry out the following steps to change the blade:

1. Undo the fastening screw (see Fig. 11).

2. Remove the blade and replace with a new

one.

3. When ﬁ tting the blade, make sure it is ins-

talled in the right direction. The blade‘s air va-

nes must project into the motor compartment

(see Fig. 11). The dome mounts provided

on the equipment must be aligned with the

punch holes provided in the blade (see Fig.

12).

4. Then retighten the fastening screw with the

universal wrench. The tightening torque

should be approx. 25 Nm.

At the end of the season, perform a general ins-

pection of the lawn mower and remove any grass

and dirt which may have accumulated. At the start

of each season, ensure that you check the condi-

tion of the blade. If repairs are necessary, please

contact our customer service center. Use only

genuine spare parts.

7.4 Ordering replacement parts:

Please quote the following data when ordering

replacement parts:

•

Type of machine

•

Article number of the machine

•

Identification number of the machine

•

Replacement part number of the part required

For our latest prices and information please go to

www.isc-gmbh.info

Spare blade art. no.: 34.045.53

8. Storage and transport

Storage

Store the equipment and accessories out of

children‘s reach in a dark and dry place at above

freezing temperature. The ideal storage tempera-

ture is between 5 and 30 °C. Store the machine in

its original packaging.

Transport

•

Switch the machine off and isolate it from the

power supply before transporting it.

•

Fit the shipping protectors, if any.

•

Protect the machine from damage and the

strong vibrations that can occur particularly

when transporting in vehicles.

•

Secure the machine against slipping and tip-

ping over.

Anl_GE_CM_18_30_Li_Solo_SPK9.indb 27Anl_GE_CM_18_30_Li_Solo_SPK9.indb 27 08.11.2017 08:44:1108.11.2017 08:44:11

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Einhell GE-CM 18-30 Li in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Einhell GE-CM 18-30 Li Manual

Product: