605916
17
Zoom out
Zoom in
Previous page
1/78
Next page
GB
- 17 -
4. Technical data
Idle speed n
0
....................................12,000 min
-1
Air speed ...............................................210 km/h
Max. operating time ..................... approx. 10 min
Protection class: ................................................III
L
WA
sound power level .............................79,5 dB
L
pA
sound pressure level ..........................68,5 dB
K uncertainty ................................................3 dB
Interchangeable battery ......18 V d.c. / 1500 mAh
.............................(optional 18 V d.c. / 3000 mAh)
.............................(optional 18 V d.c. / 5200 mAh)
Vibration ahv ....................................... 2.5 m/s
2
K uncertainty ...........................................1.5 m/s
2
Weight: .......................................................1.5 kg
Charging unit
Mains voltage ............................... 230 V ~ 50 Hz
Output
Rated voltage: ........................................ 21 V DC
Rated current ....................................... 3,000 mA
The machine may exceed 85 dB (A). The operator
will require noise protection measures if this is
the case.
The speci ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the speci ed value
in exceptional circumstances.
The speci ed vibration value can be used for initi-
al assessment of a harmful e ect.
Important!
The vibration value changes according to the
area of application of the electric equipment and
may exceed the speci ed value in exceptional
circumstances.
Keep the noise emissions and vibrations to a
minimum.
Only use appliances which are in perfect wor-
king order.
Service and clean the appliance regularly.
Adapt your working style to suit the appliance.
Do not overload the appliance.
Have the appliance serviced whenever ne-
cessary.
Switch the appliance off when it is not in use.
Wear protective gloves.
5. Before starting the equipment
5.1 Fitting the blower tube (Fig. 3)
Plug the blower tube (Fig. 1) to the motor unit
(Item 3).
5.2 Fitting the battery pack (Fig. 4a/4b)
Press the pushlock button of the battery pack as
shown in Fig. 4a and push the battery pack into
the mount provided. When the battery pack is po-
sitioned as in Fig. 4b, make sure that the pushlock
button latches in place! To remove the battery
pack, proceed in reverse order.
5.3 Charging the battery (Fig. 5)
1. Take the battery pack out of the equipment.
Do this by pressing the side pushlock buttons.
2. Check that your mains voltage is the same as
that marked on the rating plate of the battery
charger. Insert the power plug of the charger
(4) into the mains socket outlet. The green
LED will then begin to ash.
3. Insert the battery pack (5) into the battery
charger (4).
4. In the section entitled „Charger indicator“ you
will nd a table with an explanation of the LED
indicator on the charger.
The battery pack can become a little warm during
the charging. This is normal.
If the battery pack fails to charge, check:
whether there is voltage at the socket outlet
whether there is good contact at the charging
contacts
If the battery pack still fails to charge, send
the charging unit
and the battery pack
to our customer service center.
Anl_GE_CL_18_Li_SPK7.indb 17Anl_GE_CL_18_Li_SPK7.indb 17 21.05.14 13:3221.05.14 13:32
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Einhell GE-CL 18 Li at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Einhell GE-CL 18 Li in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info